text.skipToContent text.skipToNavigation

Wemo Setup

Before you begin with setting up your Wemo® device, here are a few things to consider:

  • You must have the latest Wemo App installed on your mobile device and a Wemo Account.  For instructions on how to create an account, click here.
  • Verify if your Wemo supports Apple® HomeKit™ by checking if there is a HomeKit code label at the back or side of the device.  For more instructions, click here.
  • Your mobile device must be connected to the same Wi-Fi where you want to install your Wemo.  Make sure to have your Wi-Fi password ready.  If you are using a Belkin router, you can check your Wi-Fi settings hereIf you want to change your Wi-Fi settings using the router's dashboard, click here.
  • You may need to disable the Smart network switch (sometimes called Mobile Network Switch or Auto-switch to mobile network) on your Android™ device.  For instructions, click here.  If you're using an iOS device, you may need to disable Wi-Fi Assist instead.  To learn more, click here.
 

Click on the appropriate link below to learn how to set up your Wemo.  

Setting up Wemo devices that do not support Apple HomeKit
Setting up Wemo devices that support Apple HomeKit

Setting up links for each Wemo device
 



Setting up Wemo devices that do not support Apple HomeKit

 

Step 1:  Launch the Wemo App and tap Log In.  To learn how to log into your Wemo Account, click here.


User-added image
 

Step 2:  Once you are logged in, you will be redirected to the Devices list.  This screen will show the existing Wemo devices linked to your account.
 

User-added image
 

If you don’t have existing Wemo devices, you’ll be routed to this page instead. 


User-added image
 

Step 3:  Open the Wi-Fi Settings on your phone and connect to the default Wemo Wi-Fi.
 

User-added image
 

Step 4:  Once connected, open the Wemo App again.


User-added image
 

Step 5:  Give your Wemo a name and tap Next.
 

User-added image
 

Step 6:  Select your home Wi-Fi and enter the Wi-Fi password when prompted.
 

User-added image
 

The Wemo device will try to connect to your Wi-Fi.  
 

User-added image
 

Once it’s connected, the app will discover the Wemo devices.
 

User-added image
 

Once setup is complete, you will be redirected to the Devices list where you can control your Wemo devices.
 

User-added image
 


 

Setting up Wemo devices that support Apple HomeKit


Step 1:  Launch the Wemo App and tap Log In.  To learn how to log into your Wemo Account, click here.
 

User-added image
 

Step 2:  Tap on the User-added image icon.

QUICKTIP:  This screen will show the existing Wemo devices linked to your account.  

 

User-added image
 

If you don’t have existing Wemo devices, tap Add a New Wemo.
 

User-added image


Step 3:  Choose the type of Wemo device that you want to setup.
 

User-added image
 

Step 4:  Select the Wemo device that you’d like to set up.
 

User-added image
 

Step 5:  Tap It’s Plugged In.
 

User-added image
 

If you are installing a Wemo Light Switch, tap Yes, It’s Installed.
 

User-added image
 

Step 6:  Check the light on your Wemo.  Once the light on the side of the Wemo device begins to flash orange and white, tap It’s Ready for Setup.
 

User-added image
 

For Wemo Light Switch, tap It’s Blinking Blue.
 

User-added image
 

Step 7:  Locate the HomeKit code sticker on your Wemo device.  Once you’ve found the code, tap I Found It
 

User-added image
 

For Wemo Light Switch, it shows up like this.  Tap Continue With Setup.
 

User-added image
 

Step 8:  To scan your HomeKit code, tap Let’s Scan.
 

User-added image
 

Step 9:  Scan the HomeKit code.
 

User-added image
 

NOTE:  You can also tap Don’t Have a Code or Can't Scan? and then tap Enter code... to enter the code manually.


User-added image
 

Wait until the Accessory has been added. 
 

User-added image


Step 10:  Customize the name, set the Room location and change the Type of your Wemo device.  Once done, tap Done.
 

User-added image
 

Once your your Wemo device has been added successfully to the network, you will be redirected to the Devices list.
 

User-added image

 

Setting up links for each Wemo device

For instructions on how to set up each of your Wemo device, click on the links below.  You can also click on the device image to view its Support page.
 
Wemo Light Switch, WLS040
For Android
For iOS
Wemo WiFi Smart 3-Way Light Switch, WLS0403
For Android
For iOS

User-added image
User-added image

User-added image
 
User-added image

User-added image
 

User-added image
 

 User-added image
 

User-added image
 

User-added image
 

User-added image

Sylvania Ultra iQ LED BR30 Bulb, 72627

Mr. Coffee® 10-Cup Smart Optimal Brew™ Coffeemaker with Wemo, F7C050


User-added image

User-added image

User-added image

User-added image
Wemo NetCam Wi-Fi Camera with Night Vision, F7D7601
 For Android
For iOS

User-added image

User-added image
Wemo NetCam HD Wi-Fi Camera with Night Vision, F7D7602
 For Android
For iOS
Wemo NetCam HD+ Wi-Fi Camera with Glass Lens and Night Vision, F7D7606
 For Android
For iOS

User-added image

User-added image

User-added image

User-added image

User-added image

User-added image

User-added image

User-added image

Was this support article useful?

Thank you for your feedback.

Additional Support Questions?

Search Again

CONTACT SUPPORT

  • PHONE

    Have questions about your Belkin product? Contact our support team. CALL US
  • LIVE CHAT

    A customer advocate will answer your questions. START LIVE CHAT
  • TWITTER

    Post your issue to Twitter, and we will reply in minutes. Tweet @BelkinCares
  • CONNECTED EQUIPMENT WARRANTY

    File a CEW claim for equipment damaged by a surge or power issue while connected to your Belkin product.Learn More