Adding Lightbulbs using the Wemo App

If you already have an existing Wemo® Link on your network, you can add more Lightbulbs via the Wemo App. This article will help you how to add more Lightbulbs using the Wemo App.

This article assumes that your Lightbulbs are physically set up on your desired location. If not, click on your device below to know how to do this:

Adding to the Wemo App

Step 1: Switch your Lightbulb ON.

Step 2: Launch the User-added image

App and tap More.

NOTE: If you are using an Android^TM device, tap the gear icon.

Step 3: Under SETTINGS, tap Add WeMo Link Devices.

The Wemo App will now scan for a new Wemo Lightbulb.

Step 4: Once the Lightbulb is detected, tap Add.

TIPS:

Your Lightbulbs must be on default settings (not paired to any other Wemo Link) so that it can be detected by the Wemo App. If the Lightbulb was previously connected to a network and you need to reconfigure it, you will need to reset the Lightbulb so they can get detected again.
When a Lightbulb has been detected you will see it flash for a few seconds.
By default they will appear in order as detected by the name: Osram Lightify Flex RGBW 01, Osram Lightify Flex RGBW 02, and so on.
Any Lightbulb discovered in this screen will appear with a check mark. If you do not want to add the Lightbulb, just tap it to uncheck it.