Installing the watch puck on your Belkin UltraCharge Modular Charging Dock (WIZ052) is quick and easy. Follow the steps below to make sure the puck and cable are placed correctly for proper charging.
Step 1: Open the dock.
Remove the top cover of the dock to access the inside compartment.
Step 2: Place the watch puck.
Insert the watch puck into the round slot inside the dock. Make sure it sits flat and secure.
Step 3: Connect the cable.
Plug the watch charging cable into the puck and guide the cable down through the opening.
Step 4: Position the cable correctly.
Helpful Tips for Installing the Watch Puck
-
Make sure the puck is fully seated before routing the cable.
-
Do not force the cable—if it doesn’t sit flat, reposition it.
-
Always check that the cable is in the groove before closing the dock to avoid damage.
Installing the Watch Puck on WIZ052 FAQs
Q1. What happens if the cable is not placed correctly?
If the cable is pinched or twisted, the dock may not close properly and charging may not work as expected.
Q2. Can I close the dock if the puck is not fully inserted?
No. The puck must sit flat in the slot for the top cover to fit correctly.
Q3. Do I need tools to install the watch puck on the Belkin WIZ052?
No. The watch puck is designed for easy, tool‑free installation.
