There are a few reasons why a reset is required on your router. This article will guide you in resetting your Belkin router using the web-based setup page.
To restore the router through the dashboard, click here.
NOTE: The images may vary depending on the model of your router.
Make sure that your router is connected to your computer before performing the steps below.
On your computer, open a browser like Internet Explorer®, Chrome™ or Firefox®.
In the browser's address bar, enter "192.168.2.1" and press [Enter]. You will be directed to the router's web-based setup page.
Click Login on the upper right corner.
Once prompted to log in, leave the Password field blank and click Submit.
NOTE: If you have a custom Password, enter it in the blank field. If you are still having problems accessing the router's web-based setup page, you can reset the router using the reset button, to know how to do this, click here.
Under Utilities, click Restore Factory Defaults.
On the Restore Factory Defaults page, click Restore Defaults.
At this point, the Power LED of the router will blink for a few seconds. If the LED is still not solid after a minute, restart the router. To know how to do this, click here.
Your Belkin router has now been reset to its factory default settings.