How to Apply the Belkin ScreenForce Titan LiquidGuard Screen Protector (OVC014)

Our spray-on Belkin ScreenForce Titan LiquidGuard Screen Protector (OVC014) coating strengthens your display by filling microscratches to create a smooth, water-repellent, and easy-to-clean surface. Perfect for any device screen, it can also be applied before installing a traditional screen protector. Follow the steps below to apply Titan LiquidGuard correctly and achieve the best results. 

Step 1: Clean the screen thoroughly. 

• Use the included wet wipe to remove dust, fingerprints, and oils, then dry the screen completely with the microfiber cloth. 

Step 2: Shake the Titan LiquidGuard bottle well. 

• This ensures the liquid coating is evenly mixed before application. 

Step 3: Apply the liquid to the screen. 

• Place several drops of Titan LiquidGuard directly onto the center of the screen. 

Step 4: Spread the liquid evenly. 

• Using the included cloth, gently spread the liquid evenly across the entire screen surface, ensuring that you cover all edges and corners. 

Step 5: Allow the coating to cure. 

• Leave the device undisturbed so the liquid can bond to the glass. 

Step 6: Buff the screen. 

• Once cured, lightly buff the screen with a clean microfiber cloth to remove any remaining residue and reveal a smooth finish. 

Helpful Tips (Common Mistakes to Avoid) 

• Make sure the screen is completely dry before applying the liquid. 

• Do not apply too much liquid—a few drops are enough to cover the screen. 

• Avoid touching or using the device while the coating is curing. 

• For best performance, wait up to 24 hours before heavy use or installing a traditional screen protector. 

• Wash hands after application and avoid contact with eyes.