text.skipToContent text.skipToNavigation

Setting up the Wemo WiFi Smart Light Switch, WLS040 using your Android device

The Wemo WiFi Smart Light Switch, WLS040 is an alternative to your simple wall light that allows you to view the status and control the lights anywhere in your home.  This article will guide you through steps on how to set up your Wemo® Light Switch using your Android™ mobile device.

NOTE:  The Wemo Light Switch is not designed to work with metal faceplates as these can interfere with the Wi-Fi signal.

Before you begin:

Make sure of the following:
  • The latest version of the Wemo App from Google Play™ must be installed to your mobile device.
  • The Wemo Light Switch that is already installed to your electrical line is functioning.  For hardware installation tips, click here.
  • The light of your Wemo Light Switch should be blinking blue, indicating that it is ready to be set up.  To know more about the light behavior of the Wemo Light Switch, click here.
  • Your home Wi-Fi must have a working internet connection.
  • If you are setting up more than one Wemo Light Switch, take note of their respective Wemo IDs to help identify one from the other.
QUICK TIP:  The Wemo ID (Wemo.LightV2.xxx in which xxx stands for the last three characters of the serial number) is located at the bottom of your Wemo Light Switch.
 

 
Step 1:  Launch the Wemo User-added image App then tap on Add a Wemo.
 
User-added image

NOTE:  You can also tap the gear User-added image icon then tap on Add a Wemo from there.
 
User-added image

Step 2:  Select Wemo Light Switch.
 
User-added image

Step 3:  On the next screen, select the first option.
 
NOTE:  The first option is for the Wemo Smart Light Switch 3-Way, WLS0403 and Wemo WiFi Smart Light Switch, WLS040while the second option is for the Wemo Smart Light Switch, F7C030.

Step 4:  Tap Yes, It’s Installed.
 
User-added image
 

Step 5:  Check the light on your Wemo.  If it is blinking blue, tap the It’s Blinking Blue button on the Wemo App.
 
User-added image
 
NOTE:  Tap on It’s not blinking blue and follow the on-screen instructions if you see otherwise.

Step 6:  Tap on Open Wi-Fi Settings.
 
User-added image

Step 7:  Connect to your Wemo Light Switch's default Wi-Fi name, and then re-launch the Wemo App.

Step 8:  Give your Wemo device a name then tap NEXT at the bottom.
 
User-added image

Step 9:  If prompted, enter your email address then tap NEXT.
 
User-added image

Step 10:  Select and connect to your home Wi-Fi then enter the password for your Wi-Fi then tap Save.

NOTE:  Once you are connected to the Wi-Fi, you will be redirected to the Devices section.

Setup for your Wemo Light Switch is now complete.


Related Article:


Setting up the Wemo WiFi Smart Light Switch, WLS040 using your iOS device

Was this support article useful?

Thank you for your feedback.

Additional Support Questions?

Search Again

CONTACT SUPPORT

  • PHONE

    Have questions about your Belkin product? Contact our support team. CALL US
  • LIVE CHAT

    A customer advocate will answer your questions. START LIVE CHAT
  • TWITTER

    Post your issue to Twitter, and we will reply in minutes. Tweet @BelkinCares