This article will show you how to charge the Belkin PAC003. Click on each link below to learn more.
Charging your earbuds
Charging the case
Charging your earbuds
To charge your earbuds, open the case and place each earbud in its designated slot then close the lid. If the case has battery power remaining, you do not need to plug it in while charging your earbuds.
While charging is taking place, each earbud’s indicator light will blink. When the light indicators stop blinking, this means that the earbuds are now fully charged.
Charging the case
Step 1:
Connect the micro-USB end of the connector to the back of the charging case, below the lid hinge.
Step 2:
Connect the USB end of the connector to a power adapter or into the USB port of your computer.
Connect the micro-USB end of the connector to the back of the charging case, below the lid hinge.
Step 2:
Connect the USB end of the connector to a power adapter or into the USB port of your computer.
Step 3:
When all lights on the charging case are lit, this indicates that the Belkin PAC003 is fully charged. The number of lights lit corresponds to the following:
- Four lights – 100% charged
- Three lights – 75% charged
- Two lights – 50% charged
- One light – less than 25% charged
