i. Buttons as control inputs
ii. Visual indicators
iii. Audio indicators
i. Buttons as control inputs
| Item (Type) | Button | Initial Condition | Action | Result |
| Power (momentary slider) |  | Device is OFF | Slide | Power ON |
| Device is ON | Slide | Power OFF | ||
| Pair (tact) |  | Device is ON | Press | Enter pairing mode |
| Action (tact) |  | Press | Voice command initialization | |
| Incoming call | Press | Call answer | ||
| On a call | Press | Disconnect / End Call | ||
| Mode selection: Music / Video / Party / Office | ||||
| Volume up (tact) |  | Press | Volume increments | |
| Volume level = max | Press | Volume max audible indication | ||
| Volume down (tact) |  | Press | Volume decrements | |
| Volume level = min | Press | Nothing | ||
| Play / pause (tact) |  | Bluetooth Connected | Press | Command for play / pause |
| Track back (tact) |  | Bluetooth Connected | Press | Command for track back |
| Track forward (tact) |  | Bluetooth Connected | Press | Command for track forward / next |
| Button / Ports | Main Function | Modes | Phone Calls |
| MIC | Input Audio (Voice calls) | N/A | Input Audio (Voice calls) |
| Power | Power ON / OFF speaker | N/A | N/A |
| Action Button | Answer or end phone call | Activates Modes: Music, Movie, Party, Office | End / Answer Phone call |
| Play / Next track select | Play next or previous clip | N/A | N/A |
| Volume Buttons | Adjust Volume | N/A | N/A |
| Bluetooth Pairing button | Located in the side next to the Aux port. Used for pairing with Bluetooth device. | N/A | N/A |
| Aux port | 3.5 mm Headphone jack | N/A | N/A |
| USB Micro port | Charging Fusive Speaker | N/A | N/A |
NOTE: For each visual indicator, color / pattern pairs are listed in order of the priority that they will render.
| Item | Color | Pattern | Event |
| Status Light Indicator | Orange | Solid | Battery charging |
| Blinking | Low battery | ||
| Green | Solid | Power ON, AC power, fully charged, BT connected | |
| Beacon pulse | Power ON, battery power | ||
| Blinking | Power ON, No BT connection | ||
| Fast Blink | Pairing Mode |
iii. Audio indicators
NOTE: Each audible indicator is listed in order of the priority that they would render. Audio clips and generated tones via loudspeaker as audible indicators.
| Event | Repeat | Level |
| Pairing mode initiated | No | Medium volume |
| Pairing mode enabled | Every 10 seconds | Medium volume |
| Pairing mode cancelled | No | Medium volume |
| Pairing mode successful | No | Medium volume |
| Volume max alert | No | Max output level |
| Volume step | No | Current output level |
| Battery level ~0-10 percent | No | Current output level |
| Battery level 10-25 | No | Current output level |
| Battery level 25-50 percent | No | Current output level |
| Battery level 50-70 percent | No | Current output level |
| Battery level 70-95 percent | No | Current output level |
| Battery level full | No | Current output level |
| DSP “button” is pressed | No | 60 percent volume |
| Music mode selected | No | Current output level |
| Movie mode selected | No | Current output level |
| Game mode selected | No | Current output level |
| Conference mode selected | No | Current output level |
| Power up | No | Medium volume |
| Power down | No | Medium volume |
