The free SoundForm app unlocks the full potential of your Belkin SoundForm™ Isolate Buds ANC (AUC017), letting you fine-tune sound with custom EQ, personalize your touch controls and even track down a misplaced earbud. This guide walks you through downloading the app, connecting your earbuds and getting the most out of every feature.
Get Started with the SoundForm App
Step 1: Download the SoundForm app
Search for SoundForm on the Apple App Store (iOS) or Google Play Store (Android), or scan the QR code above, and install the free app on your phone or tablet.
Step 2: Pair your earbuds
Before opening the app, make sure your AUC017 earbuds are paired with your device via Bluetooth:
- Open the charging case lid with the earbuds inside.
- On your phone, go to Bluetooth settings and select SoundForm Isolate Buds ANC from the list of available devices.
- Once paired, your earbuds are ready to connect to the app.
Step 3: Open the app and connect
Launch the SoundForm app. It should automatically detect your connected AUC017 earbuds. If prompted, allow the app to access Bluetooth so it can communicate with your earbuds.
Use the App Features
Step 4: Customize your EQ
Your AUC017 earbuds have 3 built-in EQ presets that you can switch between directly on the earbuds. The SoundForm app adds more options:
| Where | EQ options |
|---|---|
| On the earbuds | Belkin Signature Sound, Bass Boost and Balanced |
| In the SoundForm app | The 3 built-in presets plus additional EQ presets |
- From the app's home screen, tap Equalizer.
- Browse the additional EQ presets available in the app.
- Select a preset to apply it instantly. There is no need to disconnect or restart playback.
Step 5: Customize touch controls
The app lets you personalize what each tap or hold gesture does on your earbuds:
- Go to the Controls section of the app.
- Choose which action (play/pause, skip track, volume, activate voice assistant, etc.) is assigned to each touch gesture on the left and right earbud.
- Save your changes. They apply immediately to your earbuds.
Step 6: Use the Locate Earbuds feature
Misplaced an earbud? The app can help:
- Open the SoundForm app and go to the Locate or Find My Earbuds feature.
- Select the earbud you're missing.
- The app plays a sound from that earbud to help you track it down.
Step 7: Check for firmware updates
Keep your earbuds performing their best by checking for updates periodically:
- Open the app and go to Settings or Device Info.
- If a firmware update is available, follow the prompts to install it.
- Keep your earbuds in the charging case, powered on and near your phone during the update.
Frequently Asked Questions
Do I need the SoundForm app to use my AUC017 earbuds?
No. Your earbuds work right out of the box with the 3 built-in EQ presets and default touch controls. The app is optional but recommended if you want more sound customization options, personalized touch controls or the earbud-locating feature.
Will my custom EQ and touch control settings reset if I disconnect my earbuds?
No. Your settings are saved to the earbuds themselves, so they stay in place even after disconnecting or reconnecting to a different device.
The app says a firmware update is available. Is it safe to update?
Yes. Firmware updates typically include performance improvements and bug fixes. Make sure your earbuds stay powered on and near your phone throughout the update to avoid interruptions.
Helpful Tips
- Keep the app open and your phone's Bluetooth turned on for the smoothest connection.
- If the app doesn't detect your earbuds, remove and re-pair the Bluetooth connection before reopening the app.
- Custom EQ and touch control settings are saved to your earbuds, so they stay in place if you switch to a different phone. Reconnect through the app on the new device to sync changes.
- Use Multipoint (Bluetooth 5.4) to stay connected to two devices at once, like your laptop and phone, and switch between them without reconnecting.
Still have questions?
Contact Support
