The Belkin AUD005 can be connected using the USB-C® to USB-C cable. In the following example, a Windows® OS laptop is used.
1. Turn OFF the headphone. The light will be flashing to indicate that it is turning OFF.
2. Power ON the headphone. The audio setting will then be activated. The playback device is set to the default SoundForm Adapt setting.
3. Disconnect the USB-C to USB-C cable. The headphone will switch to Bluetooth® mode where the payback device will be set to SoundForm Adapt Stereo setting.
4. Reconnect the USB-C to USB-C cable.
5. Power ON the headphone.
