text.skipToContent text.skipToNavigation

Setting up your Holmes® Smart Heater with Wemo®


Setting up your Holmes® Extra-Large Room Smart Heater with Wemo®F7C047 and Holmes® Large Room Smart Heater with Wemo®, F7C048 is easy.  A simple tap on your smart device allows you to control the thermostat and temperature settings from anywhere to provide warming comfort.
 
NOTE:  For a list of the Holmes Smart Heater’s compatibility requirements and features, click
here.
 
Follow the instructions below to learn how to set up your heaters:

 
Step 1:  Download the Wemo App from the App Store® or Google Play™ by searching the keywords "Belkin" or "Wemo".
 
User-added image
 
Step 2:  Plug your heater into a power outlet.
 

Step 3:  Power ON your Holmes Smart Heater.
 

Step 4:  Press the ENABLE WEMO User-added image button to activate its Wi-Fi radio, a green light on top of it should be ON.
 
IMPORTANT:  Make sure that the WEMO User-added image light on the Smart Heater’s control panel is lit and that the wireless signal bars User-added image on top of the Wemo light is enabled.
 

Step 5:  Tap the Settings icon on your Android™ or iOS device.  Enable its Wi-Fi feature and connect to your temporary Wemo Wi-Fi.
 
QUICK TIP:  If you’re trying to connect a Holmes® Extra-Large Room Smart Heater with Wemo, F7C047, you will see WeMo.HeaterA.xxx as its Wi-Fi name (SSID).  However, if you’re trying to connect a Holmes® Large Room Smart Heater with Wemo, F7C048, connect to the WeMo.HeaterB.xxx Wi-Fi name.  (The xxx are the last three digits or characters of the device's serial number.)  
 

Step 6:  Launch the Wemo App you downloaded earlier and start setting it up by selecting your Wi-Fi name and entering your security password.  Once this is done, Remote Access will be enabled by default.  To learn more about Remote Access, click here.
 
NOTE:  To connect to a hidden network (hidden Wi-Fi), you have to do the following:
  • Scroll to the bottom of the Wi-Fi list and select Other.
  • Enter the Wi-Fi name and security password.  If your Wi-Fi is unprotected, leave the Security field set to None
Step 7:  Follow the steps on the Wemo App to complete setup.
 
QUICK TIP:  To add another device, simply repeat Steps 2-4.  It will no longer require you for a Wi-Fi password if you set it up on the same Wemo App on your mobile device. 
 
If you were unable to connect, the status light on your Wemo will blink orange, indicating it has no connection.  The blinking continues until problem is corrected.  As long as your router is ON, your Wemo units will function normally.  Make sure your router is set up to broadcast its Wi-Fi name.  If not, the Wemo will not be able to connect to it.  If the problem persists, try any of the following:
  • Use another smart device to connect to the heater's Wi-Fi.
  • Reset the heater.  After resetting, uninstall the Wemo App then reinstall it.
  • Unplug the power cord of the heater then plug it back in.
You can also watch the Wemo Setup Video for more troubleshooting tips.

 
Related Article:
 

How to personalize the Holmes® Smart Heater using the Wemo® App

Was this support article useful?

Thank you for your feedback.

Additional Support Questions?

Search Again

CONTACT SUPPORT

  • PHONE

    Have questions about your Belkin product? Contact our support team. CALL US
  • LIVE CHAT

    A customer advocate will answer your questions. START LIVE CHAT
  • TWITTER

    Post your issue to Twitter, and we will reply in minutes. Tweet @BelkinCares
  • CONNECTED EQUIPMENT WARRANTY

    File a CEW claim for equipment damaged by a surge or power issue while connected to your Belkin product.Learn More