text.skipToContent text.skipToNavigation

Manually resetting the Sylvania Ultra iQ LED BR30 Bulb, 72627

If the Sylvania Ultra iQ LED BR30 Bulb, 72627 was previously connected to a network or paired to the Wemo Link and you need to reconfigure, you will need to reset this Lightbulb so it can get detected again during the setup process.
This article will teach you how to manually reset or pair a Sylvania Ultra iQ LED BR30 Bulb again.  Follow the steps below:

Step 1:  Start with the Sylvania Ultra iQ LED BR30 Bulb being in the ON position.
User-added image
Step 2:  Turn the bulb OFF and ON times in a row, pausing second each time ON and each time OFF.

Step 3:  After the 8th time OFF, turn the bulb ON and leave it ON.  After about 5 seconds, the Sylvania Ultra iQ LED BR30 Bulb will flash which shows a successful reset.
User-added image
NOTE:  If you try the reset steps again, the Sylvania Ultra iQ LED BR30 Bulb will NOT flash again.  A Lightbulb that has been reset will not flash again after another reset.
The Sylvania Ultra iQ LED BR30 Bulb is now reset and should now be ready for pairing.   
IMPORTANT:  You will have minutes to pair it to a Wemo Link.  If you do not pair the Lightbulb back to the Wemo Link during this time, you will need to repeat the reset steps again.
NOTE:  If a Lightbulb is unpaired, it will work as a regular Lightbulb.


Was this support article useful?

Thank you for your feedback.

Additional Support Questions?

Search Again



    Have questions about your Belkin product? Contact our support team. CALL US

    A customer advocate will answer your questions. START LIVE CHAT

    Post your issue to Twitter, and we will reply in minutes. Tweet @BelkinCares

    File a CEW claim for equipment damaged by a surge or power issue while connected to your Belkin product.Learn More