text.skipToContent text.skipToNavigation

Getting to know the Belkin G54/N150 Wi-Fi Router, F9K1009

The Belkin G54/N150 Wi-Fi Router, F9K1009 is a router/access point (AP), which operates on 2.4 GHz frequency conforming to the IEEE 802.11b/g/n wireless standards.  The product is designed for home and small offices and can be configured through a web browser interface. 
 
G54/N150 Wireless Router Package Content
  • G54/N150 Wireless Router
  • Networking cable
  • Power supply
  • Quick Installation Guide
 
Product Specifications
 
SpecificationsDescription
Data Link Protocol(s)IEEE 802.11a/b/g/n
Max. Link RateIEEE 802.11n up to 150 Mbps
IEEE 802.11g up to 54 Mbps
IEEE 802.11b  up to 11 Mbps
Radio Frequency Band2.4 GHz only
Ports1 x WAN
4 x LAN 10/100 Switch
Antenna Form Factor1  External dipole non-detachable
SetupBrowser-Based Setup
UPnP®True
Wireless Security Encryption Type(s) Supported  Pre-configured Security
256-bit WPA™/WPA2™ encryption
64/128-bit WEP encryption
WPS Push Button Security True
 
System Requirements
 
System RequirementsDescription
Broadband Internet Service Cable or DSL Modem with RJ45 Ethernet connection
Operating SystemInstalled wireless Network Interface Card (NIC) and TCP/IP protocol
Windows® XP 32 (SP3 or greater), Windows Vista® 32/64-bit, Windows® 7 32/64-bit, Windows® 8 32/64-bit, Windows® 8.1 32/64-bit, Mac OS X® 10.5 above    
Minimum 1.8 GHz processor
Minimum 512 MB RAM
BrowserInternet Explorer® 7 or higher, Firefox®, Chrome™, Safari®
 
LEDs
 
Router LEDsStatus/Description
Router Status Light Your router’s status is shown by the light on the front.
Power LightOFF – The router is not plugged into a power source.
Solid Green – Power is supplied to the router.
WLAN LightOFF – WLAN is disabled.
Blinking Green – Wireless data is being transmitted.
Solid Green – WLAN is enabled but there is no data transfer.
Wi-Fi Protected Setup™ (WPS) LightOFF – Idle
Blinking Green – The router is listening for a WPS-enabled computer or other device.
Solid Green – This indicates a successful connection. The WPS LED turns solid green for five (5) minutes and then goes out when the router has made a secure connection with the computer or other device.
Blinking Green – This indicates a failed connection.  The WPS LED blinks for 30 seconds after the WPS connection fails.
WAN LightOFF – WAN connection is not active.
Blinking Green – Data is being transmitted on the WAN port.
Solid Green – The router is connected to the Internet.
LAN LightOFF – LAN connection is not active.
Blinking Green – Data is being transmitted on the LAN port.
Solid Green – The router is connected to devices through Ethernet cables.
 
 
For more information on how to manage this router, click on the links below.

Belkin G54/N150 Wireless Router, Frequently Asked Questions
Belkin N150 Wireless Router models - Quick Help Guide​

Was this support article useful?

Thank you for your feedback.

Additional Support Questions?

Search Again

CONTACT SUPPORT

  • WE’RE HERE TO HELP

    Have questions about your Belkin product? Contact our support team. CALL US
  • LIVE CHAT

    A customer advocate will answer your questions. Chat is available 24 hours, 7 days a week. START LIVE CHAT
  • TWITTER

    Post your issue to Twitter, and we will reply in minutes. Tweet @BelkinCares
  • RETURNS & CLAIMS

    Find out what to do if your product is not working as expected. Learn More