The Belkin UltraCharge Pro Power Bank 10K with BoostSolid Cell features a smart display that gives you a clear view of battery level, real-time charging wattage, port activity, temperature status, battery health, and screen brightness. Use this guide as a reference on how to read the smart display.
Button and port basics
- Button: Press to turn the battery on/off. Press again to move to the next smart display screen.
- C1 and C2: USB-C ports. These ports support input and output.
- A: USB-A port. This port is output only.
- 60W Max: Maximum single USB-C output shown by the product rating. With two or more ports in use, output is shared.
How to read each screen
1
Standby screen
Shows the remaining battery percentage while nothing is connected. The source file describes this as the standby animation recycle.
2
Main screen
Shows the remaining battery percentage and the active charging status. The first button press wakes this display for 30 seconds.
3
Wattage screen
Shows live wattage by port. A means USB-A. C1 and C2 mean the two USB-C ports. A reading of 00W means that port is not drawing charge in the sample display.
4
Temperature screen
Shows the temperature status screen. If temperature is over 36°C, the display changes to the cooling image.
5
SemiSolidState / Battery health screen
The screen cycle source labels the fourth press as the SemiSolidState display and shows the battery health-style image in that position.
6
Brightness adjustment
On the battery health display, double-click the button to change display brightness. The screen returns to the main display after 15 seconds.
Display timing reference
- Idle/no device connected: Standby animation. Repeats while idle.
- Welcome animation: SemiSolidState welcome screen. Single 2-second animation, once per 48 hours.
- 1st button press: Main screen. Display stays awake for 30 seconds.
- 2nd button press: Wattage display. Returns to main display after 15 seconds.
- 3rd button press: Temperature display. Returns to main display after 15 seconds; cooling image appears over 36°C.
- 4th button press: SemiSolidState display. Returns to main display after 15 seconds.
- 5th button press: Battery health display. Returns to main display after 15 seconds.
- Double-click on battery health display: Brightness adjustment. Cycles brightness levels.
Temperature Status and Safety Protection
The Belkin UltraCharge Pro Power Bank 10K 60W includes a temperature screen that helps you check the power bank's temperature status during use. The power bank may become warm while charging a device, recharging, or charging more than one device at the same time. To view the temperature screen, press the button three times. The display will return to the main screen after 15 seconds.
Cooling image
When the power bank gets warm, the temperature screen may change to a cooling image. This means the power bank may need time to cool down before you continue using it.
Why the cooling image may appear
- The power bank is charging a device at a higher wattage.
- More than one device is connected.
- The power bank is being recharged while charging another device.
- The power bank is used in a warm area.
- The power bank is exposed to direct sunlight.
- The power bank is covered by a pillow, blanket, clothing, or placed inside a closed bag during use.
What to do when the cooling image appears
1
Disconnect the cable and connected device.
2
Place the power bank on a cool, flat, dry surface.
3
Keep the power bank in an open area with good airflow.
4
Let the power bank cool down at room temperature before using it again.
Warning
Do not place the power bank in a refrigerator, freezer, ice, water, or any wet area.
Using the Power Bank in Cold Conditions
Very cold temperatures may affect charging or performance. If the power bank has been exposed to cold conditions, let it return to room temperature before charging or using it.
What to do after cold exposure
1
Disconnect the cable and connected device.
2
Move the power bank to a dry, room-temperature area.
3
Wait until the power bank returns to a normal temperature before using it again.
Warning
Do not heat the power bank with a hair dryer, heater, microwave, oven, hot water, or direct flame.
Built-In Temperature Protection
The power bank includes built-in protection for high-temperature conditions. This helps protect the power bank and connected devices when the product becomes too warm during use.
When to stop using the power bank
Stop using the power bank right away if you notice any of the following:
- The power bank is swollen.
- The power bank is leaking.
- The power bank is cracked.
- The power bank produces an unusual odor.
- The power bank is smoking.
- The power bank makes unusual noise.
- The power bank is too hot to touch.
Do not continue charging if the cooling image keeps appearing after the power bank has cooled down.
Notes
- Use a suitable USB-C charger and cable.
- Avoid charging the power bank under bedding, inside a closed bag, or in direct sunlight.
- If the issue continues, contact Belkin Support for help.
