How to Install Your Belkin WIC012 Dash Mount

This guide applies to Belkin WIC012 and BBB012hqBK‑MR.

Installing your dash mount is quick and easy, so you can get on the road with confidence. The adjustable arm helps you find the perfect viewing angle, while the suction base keeps your phone securely in place. Follow the steps below to ensure a strong, reliable hold on your dashboard.

Step 1: Unlock the suction base.

Turn the locking lever on the suction cup to the unlocked position so it’s ready to attach.

Step 2: Set your preferred angle.

Gently adjust and extend the arm to the position that works best for your view.

Step 3: Fine-tune the alignment.

Rotate the arm left or right until the mount is comfortably aligned for driving.

Step 4: Attach the mount to the dashboard.

Press the suction cup firmly onto a clean, flat area of your dashboard.
Note: Be sure to remove the protective sealing film from the suction cup before sticking it down.

Step 5: Secure and let it set.

Push the locking lever down to lock the suction cup in place.
Note: Leave the mount in place for 20 minutes before using to allow the suction cup to fully stabilize.

Helpful Tips for Applying the Dash Mount

Choose a clean, flat surface on your dashboard for the best hold.
Remove the protective sealing film from the suction cup before attaching the mount.
If the mount loses grip over time, wash the suction cup with water, let it dry, and reattach.

Dash Mount Installation FAQs

Q1. Why do I need to wait 20 minutes after installing the dash mount?

Waiting 20 minutes allows the suction cup to fully settle and create a stronger bond with your dashboard, helping prevent the mount from shifting during use.

Q2. What should I do if the dash mount does not stick well?

Make sure the dashboard surface is clean and flat and confirm that the sealing film has been removed. If needed, rinse the suction cup with water, let it dry completely, then reattach and lock it in place.