The following are the lights, button and ports of the Belkin AUZ002.
|
Item |
Description |
|
1 |
USB-C® power port. This is used for powering the Belkin AUZ002. This port only supports power input but not data or audio. |
|
2 |
Reset button. This is used for performing a factory restore on the Belkin AUZ002. This button is recessed to prevent accidentally pressing it. A small paper clip can be used to press the button when performing a factory restore. |
|
3 |
Analog Audio Out. The 3.5 mm Stereo Audio Auxiliary Connector is used to connect to your audio equipment. This port supports audio output only. If a cable is connected to this port, the Optical Audio port will be disabled. |
|
4 |
Digital Optical Audio Out. The SPDIF Optical Audio Connector is used to connect to your audio equipment. This port supports audio output only. This port will be disabled if a cable is connected to the 3.5 mm Stereo Audio Auxiliary port. |
|
5 |
Power and status light |
|
6 |
Microphone. This is used for adjusting audio latency during playback. This is done automatically by the Belkin AUZ002. It does not support voice commands. |
