text.skipToContent text.skipToNavigation

Resetting your Belkin @TV Box

There may be instances when you need to reset your Belkin @TV and set it back to its factory default settings.  A sample situation where a reset is applicable is when you forgot your password and you need to change it.
Resetting the @TV box will erase its memory of all settings like channel lineup, associated cable or satellite box, and other information that you provided during the setup process.  You will need to rerun the setup wizard after doing the reset in order to reconfigure it.
This article will guide you on how to reset your Belkin @TV box to factory default settings.  Follow the steps below to learn how:
NOTE:  The Belkin @TV will hold its current firmware version during a reset process.
Step 1:
Hold the Belkin @TV box in an angle where its logo is facing you.  Locate the Reset button which is positioned at the right side of the device.
Step 2:
Press and hold down the Reset button for 10 seconds.  You can use a paper clip or a pointed object to assist you with the resetting.
At this point, the Status LED on the device will keep on blinking while the reset process is in progress.  This will approximately take up to 90 seconds to complete.

Step 3:
Once the LED turns green and becomes stable, you can re-run the setup wizard to reconfigure the @TV using the PC or Mac® setup software.
Related Article:

Was this support article useful?

Thank you for your feedback.

Additional Support Questions?

Search Again



    Have questions about your Belkin product? Contact our support team. CALL US

    A customer advocate will answer your questions. Chat is available 24 hours, 7 days a week. START LIVE CHAT

    Post your issue to Twitter, and we will reply in minutes. Tweet @BelkinCares

    Find out what to do if your product is not working as expected. Learn More