The Wemo® Insight Smart Plug, F7C029 allows your home appliances to connect to your Wi-Fi. Using your Android™ or iOS device, you can program your home appliances to switch ON or OFF from anywhere. To set up your Wemo Insight, you need to know the following:
Basic System Requirements
-
Wi-Fi router
-
Android 4.4 or higher
-
iOS 9 or higher
-
Max 120 V~ / 15 A / 60 Hz / 1800 W
-
Number of Power Outlets: 1
-
Wi-Fi: 2.4 GHz, 801.11n
Compatible Operating Systems
Wemo works with Wi-Fi and mobile internet (3G / 4G). It has a free Wemo App for Android and iOS operating systems.
NOTE: Wemo does not support Windows® phone.
Maximum Power Capacity of Wemo Insight
The Wemo Insight uses very little power and this is about 1/6 of the power that a clock radio consumes. Wemo devices use less than 1.5 Watts.
IMPORTANT: It is normal that your Wemo feels warm when in use. However, your Wemo should never feel hot. If it feels hot, unplug the unit and allow it to cool down. Make sure you are not overloading your Wemo device. The maximum power capacity of Wemo is 15 Amps, 1800 Watts at 120 Volts U.S. Exceeding this limit can damage your Wemo device. If you are not using close to or over Wemo's maximum capacity and the unit still feels hot, discontinue use and contact Belkin Support immediately.
NOTE: The Wemo Insight's plugs and voltage requirements vary per region or country.
Bandwidth and Firmware
Wemo Insight uses very little bandwidth on your home network. Wemo will only use your internet bandwidth when you have Remote Access enabled.
When a firmware update is available for your Wemo device, make sure that you update it. To know how, click here.
Related Articles:
Meet the Wemo® Insight Smart Plug, F7C029
Common issues with Wemo devices
Wemo Insight Smart Plug, F7C029 Frequently Asked Questions
Setting up the Wemo® Insight, Wemo® Switch and Wemo® Switch + Motion
Changing your Wemo® device's name and icon using the Wemo App
Troubleshooting Wemo device issues
Wemo works with Wi-Fi and mobile internet (3G / 4G). It has a free Wemo App for Android and iOS operating systems.
NOTE: Wemo does not support Windows® phone.
Maximum Power Capacity of Wemo Insight
The Wemo Insight uses very little power and this is about 1/6 of the power that a clock radio consumes. Wemo devices use less than 1.5 Watts.
IMPORTANT: It is normal that your Wemo feels warm when in use. However, your Wemo should never feel hot. If it feels hot, unplug the unit and allow it to cool down. Make sure you are not overloading your Wemo device. The maximum power capacity of Wemo is 15 Amps, 1800 Watts at 120 Volts U.S. Exceeding this limit can damage your Wemo device. If you are not using close to or over Wemo's maximum capacity and the unit still feels hot, discontinue use and contact Belkin Support immediately.
NOTE: The Wemo Insight's plugs and voltage requirements vary per region or country.
Bandwidth and Firmware
Wemo Insight uses very little bandwidth on your home network. Wemo will only use your internet bandwidth when you have Remote Access enabled.
When a firmware update is available for your Wemo device, make sure that you update it. To know how, click here.
Related Articles:
Meet the Wemo® Insight Smart Plug, F7C029
Common issues with Wemo devices
Wemo Insight Smart Plug, F7C029 Frequently Asked Questions
Setting up the Wemo® Insight, Wemo® Switch and Wemo® Switch + Motion
Changing your Wemo® device's name and icon using the Wemo App
Troubleshooting Wemo device issues
