text.skipToContent text.skipToNavigation

Getting to know the Belkin AC1900 Wi-Fi Dual-Band AC+ Gigabit Router, F9K1124

The Belkin AC1900 Wi-Fi Dual-Band AC+ Gigabit Router, F9K1124 supports the latest Wireless-AC technology which is faster than the current existing wireless standards.  It supports data rates up to 600 Mbps on the 2.4 GHz and 1.3 Gbps on 5 GHz wireless band.
 
Front View
User-added image

Rear View
 

User-added image

A) Wide Area Network (WAN) port - connect your modem to this port using an Ethernet cable.   
B) Local Area Network (LAN) ports - connect computers and other wired network devices to these four (4) ports using Ethernet cables.
 
C) Universal Serial Bus (USB) port - USB devices plugged into the USB 3.0 port will be shared on your network.  The following Light Emitting Diode (LED) behavior indicates its status:
  • OFF - There are NO USB devices connected or the attached USB device is NOT in use.
  • Blinking - This means you have to wait before unplugging any USB device connected to the router until the light turns OFF.
  • ON - The USB device is connected and being shared on your network.
D) Reset button - This button is used to restore the router to factory default settings. 

E) Power connector - Connect the included power supply to this port.
 
Product Features
  • 802.11ac dual-band router
  • Data rate up to 600 Mbps on 2.4 GHz
  • Data rate up to 1.3 Gbps on 5 GHz
  • Up to 3x3 Spatial streams
  • Simple start - easy install from smartphone, tablet, or computer
  • Parental controls powered by Norton™
  • MultiBeam technology minimizes dead zones
  • One (1) WAN Gigabit port
  • Four (4) LAN Gigabit ports
  • One (1) USB 3.0 port
  • Quality of Service (QOS) automatically prioritizes video streaming
  • Digital Living Network Alliance (DLNA) Media Server for streaming Multimedia content
  • Belkin Self-Healing feature
 
Product Requirements
 
Browser Requirements:
  • Internet Explorer® v7 and above, Firefox®, Chrome™, and Safari®
OS Requirements for Setup:
  • Windows® XP 32 bit (SP3 or higher), Windows Vista, Windows 7, Windows 8, Windows 8.1, or Windows 10
  • Mac OS X® v10.5 or above 
 
NOTE:  The minimum systems requirements for mobile setup are Android™ 2.2 or higher for Android devices and iOS 4.0 or higher for iOS devices.

LED Behavior
 
User-added image
 
 
A. Router Status Light
  • OFF – Router is not plugged into a power source.
  • Blinking Blue – Router is starting up.
  • Solid Blue – Router is connected to the Internet.
  • Blinking Amber – Router can’t detect the modem.  Either the modem is OFF, not plugged to the router or is unresponsive.

B. Wi-Fi Protected Setup™ (WPS) Light
  • OFF – Idle
  • Blinking Blue – Router is listening for a WPS-enabled computer or other device.
  • Solid Blue – Router has made a secure connection with the computer or other device.
  • Amber – A connection was not created.

C. Universal Serial Bus (USB) Port
  • OFF – There are NO USB devices connected or the attached USB device is NOT in use.
  • Blinking – This means you have to wait before unplugging any USB device connected to the router until the light turns OFF.
  • ON ­– The USB device is connected and being shared on your network.

Was this support article useful?

Thank you for your feedback.

Additional Support Questions?

Search Again

CONTACT SUPPORT

Loading Shopping Cart...