Troubleshooting connection problems with the range extender

You can easily install your Belkin N600 Dual-Band Wi-Fi Range Extender, F9K1122 and your Belkin Wi-Fi Range Extender, F9K1015 using the Belkin Setup.  In case you encounter connection problems with your range extender, perform the following troubleshooting suggestions:
Unable to connect to the range extender?
If the Belkin Setup is unable to communicate with your range extender during the installation process, make sure that it is powered ON.  In case you are still unable to connect, reset your range extender.
  To do so, press and hold the reset button of your range extender for at least 10 seconds then release it
Resetting is a process that restores your range extender's settings to factory defaults.  For the Belkin F9K1122 and F9K1015, the reset button can be found at the bottom of the device.

NOTE:  The location of the reset button varies depending on your range extender's model number.  The model number of your range extender can be found on the device's sticker at the back or at the packaging of your device.

Click on the link below if you want to reconfigure the range extender to connect to your network.

Setting up the Belkin Wi-Fi Range Extender wirelessly

Unable to connect to the Wi-Fi?

There are several factors that cause wireless connection problems between your range extender and your devices.  It can be due to physical obstructions or wireless interference.  To know more, click here.

The indicator lights on the front panel shows the status of the network connectivity.  For more information about the indicator lights of your range extender, click on your model number below:

Related Articles:

Was this support article useful?

Additional Support Questions?
Search Again