text.skipToContent text.skipToNavigation

Setting up the Wemo Dimmer using an Android device

Before you begin setting up the Wemo® WiFi Smart Dimmer, F7C059 and WDS060 with the Wemo app using an Android™ device, make sure you have the following:
  • An Android device
  • An installed Wemo Dimmer.  For instructions, click here.  For additional hardware installation tips, click here.
  • The latest Wemo app available on the Google Play™
  • Connect to the default Wemo Wi-Fi name of the Wemo Dimmer.  The default name will appear as Wemo.Dimmer.xxx or Wemo.Dim2G.xxx, where xxx represents the last three digits of the serial number.

Once the requirements above are complete, proceed with the setup instructions below.
 
Step 1:  Make sure the Wemo Dimmer's light indicator is blinking blue (setup mode).  If not, reset the Wemo Dimmer.

Step 2:  Launch the Wemo app and log in to your Wemo account.  To know how, click here.

Step 3:  Tap on the plus sign.

 
User-added image

Step 4:  Select Wemo Dimmer.
 
User-added image

Step 5:  If you are setting up the Wemo Dimmer, F7C059, select the second option.  However, if you have a Wemo Dimmer, WDS060, select the first option instead.
 
User-added image

Step 6:  Make sure the Wemo Dimmer is installed.  Tap Yes, It Is to proceed.
 
User-added image

Step 7:  Check the light on your Wemo Dimmer if it is blinking blue.  If yes, tap on Yes, It's Blinking Blue.
 
User-added image

NOTE:  If the indicator light is not blinking blue, reset your device.  To know how to reset, click here.
 
Step 8:  Once your Wemo Dimmer is found, select it and tap on Connect.
 
User-added image

User-added image

NOTE:  For mobile devices with Android 10 and older versions, you will be instructed to connect to your Wemo’s Wi-Fi name.  Follow the steps provided and return to the Wemo app to continue.

Step 9:  Give your Wemo Dimmer a name and tap Next.

 
User-added image

Step 10:  Select the type of bulb that you have and tap Next.
 
User-added image

NOTE:  If you have mixed bulbs, tap on I have a mix of bulb types.

The Wemo Dimmer works best if you have bulbs of the same type.

 
User-added image
 
Step 11:  Tap Yes, Let’s Test to test the brightness level and then tap on Test to proceed.  Otherwise, tap on No, I’ll go with the defaults to use the default.
 
User-added image

User-added image

 
Step 12:  To test the brightness range, tap on Test.
 
User-added image
 
Step 13:  The screen asking Was the Brightness Range Right and Flicker-Free? will appear.  If yes, tap on Yes.  To make changes, tap on No, I want to adjust it.
 
User-added image

Step 14:  Then, tap Done.
 
User-added image

If prompted to select your Wi-Fi, select your network and enter your Wi-Fi password.

Congratulations!  Your Wemo Dimmer is now ready to use.  To adjust the brightness levels and bulb type, just tap on Edit and select your Wemo Dimmer.
 
User-added image

Was this support article useful?

Thank you for your feedback.

Additional Support Questions?

Search Again

CONTACT SUPPORT

  • PHONE

    Have questions about your Belkin product? Contact our support team. CALL US
  • LIVE CHAT

    A customer advocate will answer your questions. START LIVE CHAT
  • TWITTER

    Post your issue to Twitter, and we will reply in minutes. Tweet @BelkinCares
  • CONNECTED EQUIPMENT WARRANTY

    File a CEW claim for equipment damaged by a surge or power issue while connected to your Belkin product.Learn More