How to turn OFF the Wemo Doorbell chime in the Home app

The Wemo Smart Video Doorbell, WDC010 is compatible with mechanical doorbell chimes and can be set to ring them when used with the Doorbell Power Kit included in the package with the Wemo Doorbell.  There may be an occasion that you wish to disable the doorbell chime from ringing inside your house. 

If you are using an iOS device with iOS 14 or later, you can disable the chime in the settings.  This allows you to turn the chime ON and OFF whenever you like.  Changing this setting only impacts the ringing of the mechanical chime.  The doorbell itself will still make a sound to let the person know the button was pressed. 

NOTE:  If you are using iOS 13 or earlier, you will not be able to follow these steps.  You will need to install the chime bypass connector instead and follow the steps to place the doorbell in bypass mode. 
 
Step 1:  Open The Home App and tap on the tile for your Wemo Doorbell.
 
sf318694-001_en_v1.png 

Step 2:  Tap on the gear icon to bring up the device settings.  The setting is automatically saved when and applied as soon as you tap on the X to close the settings page.

sf318694-002_en_v1.png

Step 3:  Scroll down to Chime Doorbell.  Tap on the slider to enable and disable the chime.
 
  • Green - Enabled 
  • Grey - Disabled

sf318694-003_en_v1.png

The setting is automatically saved when and applied as soon as you tap on the x icon to close the settings page.

Was this support article useful?

Additional Support Questions?
Search Again