Wemo WiFi Smart Dimmer, F7C059
| Color | Status | Description |
 | OFF | Wemo Dimmer is OFF |
 | White | Wemo Dimmer is working normally |
 | Blinking white | Wemo Dimmer is starting up or its firmware is upgrading. |
 | Blue | Setup is finished (30 seconds) |
 | Blinking Blue | Wemo Dimmer is ready for setup |
 | Green | Wemo Dimmer is responding to a rule |
 | Blinking Green | Wemo Dimmer is activating a long-press rule. Press and hold for 2 seconds. Create in rules to turn other Wemo devices ON and OFF. |
 | Solid Red | Wi-Fi signal is low. Single tap the bar under the ON/OFF button to hide the red light for 24 hours. |
 | Blinking Red |
Single blink – Wemo Dimmer has lost connection to the router. Single tap the bar under the ON/OFF button to hide the red light for 24 hours.
Blinking slowly (solid for 4 seconds) - Wemo Dimmer has overheated and turned itself OFF to cool down. It will turn ON automatically in a few minutes.
|
 | White | Press and hold the bar below the power button for 2 seconds then release when the light illuminates white to restart your Wemo Dimmer. |
 | Blue | Press and hold the bar below the power button until the light turns blue to reset your Wemo Dimmer’s Wi-Fi settings. |
 | Red | Press and hold the bar below the power button until the light turns red to restore your Wemo Dimmer to its factory default settings. |
Wemo WiFi Smart Dimmer, WDS060
| Color | Status | Description |
 | OFF | Wemo Dimmer is OFF |
 | White | Wemo Dimmer is working normally |
 | Blinking White | Wemo Dimmer is starting up or its firmware is upgrading |
 | Blue | Setup is finished (30 seconds) |
 | Blinking Blue | Wemo Dimmer is ready for setup or is responding to a third-party interaction (e.g., Amazon Echo, Google Home™, IFTTT). |
 | Green | The light bar will flash green when the Wemo Dimmer is turned ON by a rule or when you have activated a long-press rule. |
 | Orange | Wemo Dimmer is on Away Mode. The switch turns ON/OFF occasionally to make it look like someone’s home. |
 | Blinking Red |
Single blink – Wemo Dimmer has lost connection to the router. Single tap the bar under the ON/OFF button to hide the red light for 24 hours.
Blinks red twice quickly – Wi-Fi signal is low. Single tap the bar under the ON/OFF button to hide the red light for 24 hours.
Blinks red slowly (solid for 4 seconds) – Wemo Dimmer has overheated and turned itself OFF to cool down. It will turn ON automatically in a few minutes.
|
 | White | Press and hold the bar below the power button for 2 seconds then release when the light illuminates white to restart your Wemo Dimmer. |
 | Blue | Press and hold the bar below the power button until the light turns blue to reset your Wemo Dimmer’s Wi-Fi settings. |
 | Red | Press and hold the bar below the power button until the light turns red to restore your Wemo Dimmer to its factory default settings. |
