text.skipToContent text.skipToNavigation

Setting up the Wemo WiFi Smart Outdoor Plug, WSP090 using an iOS device

The Wemo WiFi Smart Outdoor Plug, WSP090 is a new addition to the Wemo® product line.  Taking the functionality of the Wemo Smart Plugs and placing it in an outdoor safe enclosure, the Wemo Outdoor Plug is a weather-resistant, dual plug smart switch perfect for your lighting and decorating needs.

This article will help you set up the Wemo Outdoor Plug using an iOS device.  For setup instructions when using an Android™ device, click

Before you begin
  • Download the latest Wemo app from the App Store®.
  • Create a Wemo account.  For instructions, click here.
  • Make sure your mobile device is connected to your home Wi-Fi.
  • Write down the default Wi-Fi name (e.g., Wemo.Plug.001) for the following scenarios:
  • If you are unable to scan the HomeKit® code during setup (for manual code entry)
  • If you are setting up multiple Wemo Outdoor Plugs

Step 1:  Launch the Wemo app and log in to your Wemo account.  For instructions, click here.
User-added image

Step 2:  Tap on the plus icon.
User-added image

Step 3:  Select Wemo SmartPlugs.
User-added image

Step 4:  Tap on the Wemo Outdoor Plug icon at the upper right side of the screen.
User-added image

NOTE:  If prompted to access Home Data, tap on Allow Access

Step 5:  Read the Tips for Outdoor Plugs and tap Next.

User-added image

Step 6:  Find a safe location for your Wemo Outdoor Plug then tap Got It.
User-added image

Step 7:  Once you've plugged in your Wemo, tap It's Plugged In.
User-added image

NOTE:  Tapping on What's a GFCI outlet will take you to a page that helps explain what it is and why it is recommend to use.

Step 8:  Check to see if the light on your Wemo Outdoor Plug is blinking orange and white.  If it is, tap It's Blinking Two Colors.
User-added image

NOTE:  If the light is not blinking orange and white, tap on It’s not blinking two colors at the bottom for further instructions.  You may need to reset your Wemo Outdoor Plug.

Step 9:  If your Wemo has a HomeKit code, tap Yes, I have a HomeKit code.  Otherwise, tap No, I don't have a code.

NOTE:  The HomeKit code can be found in the quick start guide and at the bottom of the Wemo Outdoor Plug.

User-added image

Step 10:  To scan your HomeKit code, tap on Let’s Scan.
User-added image

NOTE:  If you have multiple homes, you will be prompted to select your current home.
User-added image

Step 11:  Scan the HomeKit code. 
User-added image

NOTE:  To enter the code manually, tap on I Don’t Have a Code or Cannot Scan first and then tap on Enter code.
User-added image

Wait for the device to be added. 
User-added image

Step 12:  Once your Accessory has been added, you can customize the name, set the room location, and change the type.  Once done, tap on Next.

NOTE:  You can also change these settings in the Apple® Home app.
User-added image

Step 13:  Select an option from the Suggested Scenes or just tap on Done.

NOTE:  You can also add the Wemo Outdoor Plug to a scene or make any scene changes in the Apple Home app. 

User-added image

Your Wemo Outdoor Plug should now be ready to use.

Was this support article useful?

Thank you for your feedback.

Additional Support Questions?

Search Again


Loading Shopping Cart...