Keep your Belkin Clear Case looking its best with regular cleaning and proper care. This guide covers how to remove dirt and fingerprints, clean the clear surface, and help prevent discoloration and wear.
Before You Begin
- Remove your iPhone from the case before cleaning.
- Disconnect any attached accessories such as chargers, wallets, or lanyards.
- Do not use harsh chemicals, bleach, acetone, paint thinners, or abrasive cleaning products.
Removing Dirt and Fingerprints
Dust, fingerprints, and everyday grime can build up on your case over time.
What You'll Need
- Soft microfiber cloth
- Clean water
- Mild hand soap (if needed)
Cleaning Instructions
1
Remove the case from your phone.
2
Wipe the entire case with a dry microfiber cloth to remove loose dust and debris.
3
If fingerprints or dirt remain, slightly dampen the cloth with water.
4
Gently wipe all surfaces of the case using circular motions.
5
For stubborn dirt, add a small amount of mild hand soap to the damp cloth and clean the affected area.
6
Wipe away any soap residue with a clean damp cloth.
7
Allow the case to air dry completely before reinstalling it on your phone.
Helpful Tip
Regular cleaning helps maintain the crystal-clear appearance of your case and prevents buildup from everyday handling.
Cleaning the Clear Finish
The Clear Case is designed to showcase your iPhone while providing everyday protection.
Best Cleaning Method
- Use a soft microfiber cloth dampened with water.
- Gently wipe the clear surface to remove fingerprints, skin oils, and dust.
- Dry the case immediately with a clean microfiber cloth.
Avoid These Cleaning Products
Do not use:
- Alcohol-based cleaners
- Bleach
- Acetone or nail polish remover
- Abrasive cleaners
- Rough scrubbing pads
These products may damage the surface and affect the appearance and clarity of the case.
Preventing Discoloration and Wear
While the case is designed with UV-resistant materials to help reduce yellowing and discoloration, proper care can help keep it looking clearer for longer.
Best Practices
- Clean the case regularly to remove dirt, oils, and residue.
- Remove lotions, sunscreen, makeup, or other cosmetic products from the case as soon as possible.
- Avoid prolonged contact with dyes from denim, handbags, or other colored materials.
- Store the phone in a clean, dry environment when not in use.
- Avoid exposing the case to excessive heat for extended periods.
If the Case Gets Wet
1
Remove the case from the phone.
2
Wipe it dry with a soft cloth.
3
Allow it to air dry completely before reinstalling.
Frequently Asked Questions
Can I wash the case under running water?
Yes. You can rinse the case with clean water, but make sure it is completely dry before placing it back on your phone.
Can I use disinfecting wipes on the case?
It is best to use a soft cloth with water or mild soap. Harsh cleaning chemicals may affect the appearance of the case over time.
Why does my clear case look cloudy or dull?
Dirt, oils, and everyday residue can build up on the surface. Regular cleaning with a microfiber cloth can help restore clarity.
How often should I clean my case?
For best results, clean the case whenever you notice visible dirt, fingerprints, or buildup from daily use.
Will the case turn yellow over time?
The case is designed with UV-resistant materials to help reduce yellowing. However, exposure to sunlight, heat, and certain chemicals may affect the appearance over time.
Can scratches be removed from the clear surface?
Minor marks may become less noticeable after cleaning, but deep scratches are generally permanent. Regular care can help keep the case looking its best.
