This article will show you the Belkin AUC001’s general controls and light behavior.
| Description | Operation | Function | Light Status | Audio Tone |
| Auto ON | Removed one or both earbuds from the case | Goes to auto connect or first time pairing | Follows light pattern for connecting or pairing | Power ON tone |
| First Time Pairing | Both earbuds are removed from the case | Both left and right earbud lights will flash until paired or returned to the case | Earbuds will flash white and blue until paired | Bluetooth® pairing tone |
| Auto Connect (previously paired) | Both earbuds are removed from the case | Both left and right earbud lights will flash until connected or returned to case | Both left and right earbud lights will flash blue until connected | Once connected, the Bluetooth connected tone will be heard |
| Single earbud Auto Connect (previously paired) | Single earbud is removed from the case | Light flashes until connected or returned to the case | Light on the earbuds will flash blue until connected | Once connected, the Bluetooth connected tone will be heard |
| Factory Reset / Manual Pair | Simultaneously long pressed for 10 seconds on both the left and right earbuds | Prefers not to return the earbuds into case or opts to "forget device" on the mobile device's Bluetooth settings | After the 10-second hold, the light on each earbud will flash white and blue (pair mode) and tone will be heard upon entering pairing mode | Bluetooth pairing tone when reset is complete and Pairing mode begins |
| Earbud battery level status | Returned earbud to case | Earbud batteries are charged when returned in the case as needed | Lights on the earbud will pulse white while charging Earbuds that have full charge lights will turn solid white for 5 seconds then turn OFF When earbuds are put into the case, the case battery level lights will turn ON for 5 seconds and then OFF | N/A |
| Case battery level status | Removed and / or returned earbuds to the case | Case battery level lights turn OFF after 5 seconds (unless plugged into the power source) | 100% - four solid white lights 75% - three solid white lights 50% - two solid white lights 25% - one solid white light | N/A |
| Charging the case | Connected the case to the power source | Lights will remain ON until the earbuds and case are fully charged. Once charged, the earbuds will turn OFF after 5 seconds | 100% - four solid white lights for 5 seconds Less than 100% - three solid, one pulsing white lights Less than 75% - two solid, one pulsing white lights Less than 50% - one solid, one pulsing white lights Less than 25% - one pulsing white light | N/A |
| Unplugging case - battery level status | Removed the power cable from the case | Lights on the case turn OFF after 5 seconds | 100% - four solid white lights 75% - three solid white lights 50% - two solid white lights 25% - one solid white light | N/A |
| Earbud Low Battery - 10% | In use - low battery | N/A | None | Low battery tone (heard once) |
| Earbud Low Battery - 5% | In use - low battery | N/A | Lights will flash red continuously until placed in charge case | Low battery tone once every 60 seconds |
| Earbud Dead Battery - 3% | In use - low battery | Earbuds Power OFF | None | Dead battery tone |
| Power OFF | Pressed and held both the left and right earbuds for 6 seconds | N/A | None | Power OFF tone |