Pre-installation Guide
- Determine where you will be mounting the Belkin F1DN-MOD-VMOUNT bracket and the orientation of the bracket to the back of the monitor.
NOTE: If the monitor to be used does not have an exposed 100 mm x 100 mm VESA pattern and nut inserts, the mount will require a third-party adapter and monitor stand. Contact your system administrator for details on how to achieve the adapter and stand. If the monitor does have an exposed 100 mm x 100 mm VESA pattern, continue with the installation instructions below.
- Ensure that the bracket will be installed on a flat, clean, and dry surface on the monitor. The bracket is not intended for exposed outdoor installation.
- Ensure that the maximum distance between the KVM/KM bracket and each computer does not exceed your cabling lengths.
- Ensure that the keyboard, mouse, and display cables will reach the mounted KVM/KM.
- Ensure that the KVM/KM's remote control buttons are easily visible and accessible.
- Ensure that the included screws are of adequate size and type for the designated installation. In some adapter and stand, a third-party hardware may be required.
Installation
Step 1:
Determine the location for the mount to be installed on the back of the monitor.
Step 2:
Slide the unit with the power connector and host/console cables into the mount with the cables facing the tie wrap slots.
Step 3:
Ensure that the maximum distance between the KVM/KM bracket and each computer does not exceed your cabling lengths.
Step 4:
Secure the unit using the included cable ties around each or several hosts and console cables. Using the tie wraps, secure each cable to the mount. Multiple colors are included to allow for easy recognition of the connected enclave. Make sure that the KVM/KM's remote control buttons are easily visible and accessible.
Step 5:
Screw the bracket to the monitor VESA pattern (100 mm x 100 mm) using four of the screws provided. You can also use other non-provided hardware as required with an adapter and stand.
Step 6:
Attach the keyboard, mouse, and remote control to the KVM/KM unit.
Step 7:
Once installed, follow the instructions provided with the KVM/KM on how to power up the KVM/KM unit as required.
Determine the location for the mount to be installed on the back of the monitor.
Step 2:
Slide the unit with the power connector and host/console cables into the mount with the cables facing the tie wrap slots.
Step 3:
Ensure that the maximum distance between the KVM/KM bracket and each computer does not exceed your cabling lengths.
Step 4:
Secure the unit using the included cable ties around each or several hosts and console cables. Using the tie wraps, secure each cable to the mount. Multiple colors are included to allow for easy recognition of the connected enclave. Make sure that the KVM/KM's remote control buttons are easily visible and accessible.
Step 5:
Screw the bracket to the monitor VESA pattern (100 mm x 100 mm) using four of the screws provided. You can also use other non-provided hardware as required with an adapter and stand.
Step 6:
Attach the keyboard, mouse, and remote control to the KVM/KM unit.
Step 7:
Once installed, follow the instructions provided with the KVM/KM on how to power up the KVM/KM unit as required.
