Flip, PS/2 (F1DF102P) user guide download here.

Flip, PS/2 with Audio (F1DG102P) user guide download here.

Flip, USB with Audio (F1DG102U) user guide download here.

Flip, Wireless (F1DG102W) user guide download here.

Flip, DVI-D (F1DG102D) user guide download here.

What operating systems does Flip support? What type of mice does Flip support? What is the maximum video resolution that Flip supports? Can I use my DVI monitor with Flip? Do I have to install any software to use Flip? Do I have to connect one notebook and one desktop computer to Flip? Does Flip allow me to transfer files from one computer to another computer? Does Flip require an AC adapter? Can I use Flip to switch video signals only?

Q: What operating systems does Flip support? A: All Flip models support Windows® 98SE, 2000, XP, 2003; and Linux®. The Flip USB model (part number F1DG102U) also supports Mac OS® X v10.3 or higher.

Q: What type of mice does Flip support? A: Flip will support PS/2 and USB mice from many manufacturers including Belkin, Microsoft®, Logitech®, and Kensington®.

Q: What is the maximum video resolution that Flip supports? A: The advanced video circuit in Flip supports a maximum resolution of 2048x1536@65Hz.

Q: Can I use my DVI monitor with Flip? A: Yes, you can use a DVI-I monitor with Flip by attaching a VGA adapter to the monitor's DVI connector.

Q: Do I have to install any software to use Flip? A: No, Flip does not require any software to be installed in your computers.

Q: Do I have to connect one notebook and one desktop computer to Flip? A: No, Flip can also be used for two notebook computers or two desktop computers.

Q: Does Flip allow me to transfer files from one computer to another computer? A: No, Flip allows you to share peripherals between computers (monitor, keyboard, mouse, and speakers). To share or transfer files between computers, you will need a networking switch.

Q: Does Flip require an AC adapter? A: No, no additional power supply is required for Flip to function properly.

Q: Can I use Flip to switch video signals only? A: Yes, you can just connect the included cables to the VGA ports on your computers and use the front-panel buttons on Flip to switch between video signals.

Monitor Support Keyboard Support Mouse Support Speaker Support General Support

Monitor Support

I am getting ghosting, shadowing, or fuzzy images on my monitor.

• Check that all video cables are inserted properly.
• Check that the monitor you are using supports the resolution and refresh-rate setting on your computer.
• Check that the graphics card you are using supports the resolution and refresh-rate setting on your computer.
• Connect the monitor directly into the computer with which you are having trouble with to see if the problem still appears.

I am getting a black screen on my monitor.

• Check that all video cables are inserted properly.
• Connect your monitor directly to the computer to verify that your monitor is functioning properly.
• Take your computer off standby mode.
• Check that the power supply is properly connected.

Keyboard Support

My computer does not detect my keyboard and I get a keyboard error reported at + boot up.

• Check that your keyboard cable is connected properly to Flip. Tighten any loose connections.
• Make sure that the drivers for your keyboard are installed on your computers.
• Connect the Flip USB cable directly to a USB port on your computer.
• Enable USB support on your BIOS.
• Uninstall all other keyboard drivers from your computers.
• Try swapping your keyboard with a different one.

Mouse Support

My mouse is lost when I switch to a different computer.

• Check that your mouse cable is connected properly to Flip. Tighten any loose connections.
• Attach the mouse directly to the computer with which you are experiencing mouse problems.
• Allow up to one minute after your computer wakes up from standby mode for mouse function to return.
• Deactivate power management schemes on the computer with which you are experiencing problems.
• Try swapping the mouse with a different one.

My computer boots up fine, but the mouse does not work.

• Make sure that the drivers for your mouse are installed on your computers.
• Make sure the mouse works when directly plugged into the computer. (Rebooting may be necessary when trying this.)
• Try a different mouse.

When I switch from one computer to another, mouse movement is completely erratic.

• Make sure you do not have more than one mouse driver installed.
• Avoid moving the mouse or pressing the mouse button when switching ports on your Flip.
• You can reset the mouse and resume proper mouse movement simply by unplugging the mouse from your Flip and waiting 2-3 seconds before plugging it in again.

Speaker Support

The Flip audio cable is not long enough to connect to the audio-output jack on my laptop.

• The Belkin Mini-Stereo Extension Cable (part number F8V204-06) allows you to extend the Flip audio cable by six feet. This cable is available for purchase at www.belkin.com.

General Support

My computer does not boot up when connected to Flip, but works fine when I connect the monitor, keyboard, and mouse directly to it.

• Make sure that the keyboard and mouse cables are connected tightly between Flip and the computer.
• Check that the USB cables are not crossed, i.e., make sure the connectors are plugged into the correct ports.

If you need additional support, please contact us at techsupp@belkin.com.