The Conserve Valet™ is a smart USB charging station that lets you charge all of your mobile devices in one convenient place, and automatically shuts off power including standby power after devices are fully charged. It even senses when new devices are added so you always get a full charge. The product itself draws zero power when not in use—so you can keep your devices ready to go without wasting energy.
This article will guide you with setting up the Conserve Valet™.
Step 1:
Plug in your USB device cords that you want to use with your Conserve Valet™ smart USB charging station.
NOTE: It is recommended that you use the USB cable that came with your mobile device. If your device did not come with a USB cable, please refer to your manufacturer for availability. We have included a USB to Mini-USB Cable and a USB to Micro-USB Cable, which might work with your devices.
Step 2:
Wind your USB cords around the inner spool of your Conserve Valet™ to manage the cords. You can choose not to do this.
Step 3:
Secure your USB cords by clipping them into the appropriate eyelet located under the lower housing of your Conserve Valet™.
Step 4:
Plug the AC power cord into your Conserve Valet™ and plug the other end into a power outlet.
Step 5:
Connect your devices to their respective USB cords and place them on the Conserve Valet™ pad.
Step 6:
Press the light-green power button and the LED will illuminate; power is now flowing to your devices.
Step 7:
Once all connected devices are charged (approximately 4 hours), the LED light will flash 3 times and your Conserve Valet™ will power down.
NOTE: If you connect an additional device during charging, the Valet will restart the charge time to ensure that the new device is fully charged before powering down. If you unplug all your devices, the Valet will automatically power down after 2 minutes.
QUICK TIP: When sitting idle, the Conserve Valet™ uses no power.
For more detailed instructions please click for the Conserve Valet™ User Guide.
