This article will guide you on how to set up the ScreenCast AV receiver. Follow the steps below to know how:
Step 1:
Connect your ScreenCast AV receiver to your HDTV using an HDMI cable.
Step 2:
Connect the included power adapter to the ScreenCast AV receiver through its Power port. Connect the other end of power supply into an available electrical outlet then switch it ON. Your setup should now look like this:
QUICK TIP: The receiver can be wall-mounted with the included hardware and placement guide. If you are wall-mounting, make sure that the IR lens on the receiver can be detected by your remotes. To test this, mount the ScreenCast receiver then use your remote control to where you'll be watching the HDTV. The ScreenCast receiver is in a good position if you see a blue flash on the receiver's top LED when you press a key on the remote control.
