Wall mounting your Belkin Digital Video Baby Monitor with Night Vision, F7C037

The Baby unit is ready for tabletop use.  However, you have the option to wall mount it using the supplied wall mounting bracket.  This article will provide you instructions on how to wall mount your Belkin Digital Video Baby Monitor with Night Vision, F7C037.
 
Before you wall mount this device, ensure the following:
  • That the wall can support the weight of the product.
  • That the power adaptor will reach the power socket
  • That you are not drilling into any hidden wiring or plumbing.
IMPORTANT:  Make sure you test the units from the proposed position before wall mounting.  For instructions, click here.
 
Step 1:
Place the wall mounting bracket against the wall where you want to wall mount the Baby unit and use a pencil to mark the top two (2) holes.

 
User-added image
 
Step 2:
Remove the wall mounting bracket and check the reception strength of the Baby unit and camera angle before drilling two (2) holes in the wall using a 5mm drill bit.
 
Step 3:
Align the wall mounting bracket and screws with the holes in the wall.  Attach the screw in the middle hole first so that the wall mounting position is fixed, then attach the other screw in the top hole.
 
User-added image
 
Step 4:
Place the Baby unit onto the wall mounting bracket and tighten the screw into the threaded socket at the bottom to secure the Baby unit in place.

 
User-added image

Your Belkin Digital Video Baby Monitor is now ready for use.
 

Was this support article useful?

Additional Support Questions?
Search Again