text.skipToContent text.skipToNavigation

Manually restarting or resetting the Wemo® Wi-Fi Smart Light Switch, F7C030



Resetting or restarting your Wemo® Wi-Fi Smart Light Switch, F7C030 is easy with its dedicated Reset and Restart buttons. 
 
Perform restart if:
  • The Wemo Light Switch is not detected by the Wemo App.
  • The Wemo Light Switch is blinking orange after a firmware update.
  • The Wemo Light Switch has become unresponsive to both the app and manual controls.
Perform reset if:
  • You recently changed your Wi-Fi router or your Wi-Fi name or password.
  • You want to erase any stored settings.

NOTE:  On the Wemo Light Switch faceplate, the Reset button is also known as the Wi-Fi Reset button, while the Restart button as the Power Restart button.
 
User-added image
 
How to restart your Wemo Light Switch
 
To restart the Wemo Light Switch, press the Restart button for 1 second and then release.  The Wi-Fi Indicator light will begin to blink green to show it is restarting.  If the Wemo Light Switch is not responding to the Restart button, turn OFF the power of the Wemo Light Switch by turning the circuit breaker OFF and then turning it back ON.
 
How to reset your Wemo Light Switch
 
Resetting using the Wemo App
Resetting using the Reset button
 
Resetting using the Wemo App
 
Step 1:  Launch the User-added image App.
 
Step 2:  Tap on the pencil icon.  
 
User-added image
 
Step 3:  Tap WeMo Light Switch.
 
User-added image
 
Step 4:  Tap Reset Options.
 
User-added image
 
Step 5:  Tap Reset Name, Rules & Data.
 
User-added image

Resetting using the Reset button
 
IMPORTANT:  This process will delete all previous settings done in the Wemo App and reset your Wemo Light Switch to factory default settings.  You will need to set up the Wemo Light Switch with the Wemo App again.  For setup instructions, click here.
 
Step 1:  Press the Restart button for 1 second and then release.  The Wi-Fi Indicator light will begin to blink green to show it is restarting. 
 
QUICK TIP:  If the Wemo Light Switch is not responding to the Restart button, turn OFF the power of the Wemo Light Switch by turning the circuit breaker OFF and then turning back ON.
 
Step 2:  Immediately press and hold the Reset button for 5 seconds.  The Wemo Light Switch Wi-Fi light will blink orange rapidly, indicating a successful restore.

The Wemo Light Switch will take about 90 seconds to perform the restore.  When ready, the Wi-Fi Indicator light will begin to alternate between green and orange to show it is ready to be set up.


Related Article:


Why the status light is blinking on my Wemo® device?

Was this support article useful?

Thank you for your feedback.

Additional Support Questions?

Search Again