- Changing the Belkin router’s wireless channel
One of the best solutions to resolve slow and intermittent wireless internet connection is by changing the channel of your router. You can choose a lower or higher channel to improve your Wi-Fi's performance and reliability. This article will show you how to update the wireless channel of your device through the web-based setup page. If your router uses the Dashboard interface, click here.
Launch a web browser.
Enter "http://router" or the router's default IP address, "192.168.2.1" in the Address bar and press [Enter]. If it doesn't work, check your router's IP address. For instructions, click here.
Once prompted to log in, leave the Password field blank and click the Submit button.
Under the Wireless section, click Channel and SSID.
Look for the Wireless Channel section and select your preferred wireless channel. Channels 1, 6, or 11 are recommended since they are considered as non-overlapping channels.
QUICK TIP: Available wireless channels may vary depending on your region.
QUICK TIP: You can also change the Wi-Fi name on the Channel and SSID section.
Click Apply Changes to save the settings.
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.