This guide shows you how to safely insert your Nintendo Switch™ 2 into the case and remove it when you’re ready to play. Proper alignment helps the console sit securely and prevents unnecessary pressure on the case or stand. Follow the steps in order and use the recommended angles shown in the illustrations for a smooth fit and release. If the console doesn’t move easily, stop and recheck alignment before trying again.
A. How to Insert the Nintendo Switch™ 2 (Switch 2 In)
- Hold the Switch 2 above the case.
- Align the bottom of the console with the slot or connector inside.
- Lower the Switch 2 straight down into place.
- Make sure it sits securely and is properly aligned.
Helpful Tip
-
Do not force the Switch 2 in or out of the case. If it does not move smoothly, check the angle and alignment before trying again.
B. How to Remove the Nintendo Switch™ 2 (Switch 2 Out)
You can remove the Switch 2 in two safe ways, depending on how it is positioned inside the case.
- Make sure the Switch 2 is lying flat inside the case.
- Gently slide the console sideways in the direction shown.
- Keep the angle at 45° or less while removing it.
- Lift the Switch 2 out once it is free.
- Open the stand inside the case.
- Hold the Switch 2 securely.
- Lift the console upward while keeping the angle at 70° or less.
- Remove the Switch 2 completely from the case.