ScreenCast AV Settings - Adding a Transmitter

In the Settings menu, select “Add or Delete a transmitter.” On the screen that shows next, you will choose “Add a transmitter.”

Next you'll be instructed on how to connect the new transmitter.  Press the Pair button on the receiver and then press the Pair button on the new transmitter; the process is similar to how a Bluetooth® headset connects to a mobile phone.  The transmitter and receiver will exchange information and create a secure connection with each other.  Pairing could take up to 60 seconds.
 

If connection was successful, you will see a screen similar to the one below.
 

If connection failed, you will see a screen like the one below:
 

TIP:  To improve the range of the transmitter, you can move it so that there are fewer barriers (like walls or cabinets) between it and the receiver.  You may find that a simple shift of the product a few inches or feet will bring you to the desired level of connectivity.
 

NOTE:  It is possible to initiate connection with a new transmitter by pressing the “Pair” button on the back of the receiver. The “Pair” button might be labeled “Connect” on some models.  After pressing the button on the receiver, walk to the transmitter and press the same Pair/Connect button there.