How to back up settings on a Belkin router


The Save/Backup Settings is a feature in Belkin routers that lets you back up all configurations made to the router.  You can use this feature is if you need to reset your Belkin router to its factory default settings.  Instead of manually setting up the router from scratch after the reset, you can use the backup file to load all the previous configurations that you have already set on your Belkin router.

Before starting, take note of the following: 

  • Make sure that your Belkin router is connected to a computer using an ethernet cable.
  • This article does NOT apply to Belkin routers using the Belkin Dashboard.  For more information, click here.
Follow the steps below to learn how to back up settings on your Belkin router:
 

Step 1:
On your computer, open any browser (e.g., Internet Explorer®, Firefox®, Chrome
or Safari®).
 

Step 2:
In the Address bar, enter your router's IP address and press [Enter] to access the router's web-based setup page.  The default IP address of a Belkin router is 192.168.2.1.  For instructions on how to check the IP address of your router, click here.

NOTE:  Screenshots may vary depending on your router's model.  

 

User-added image


Step 3:
Click Login on the upper right corner.

 

User-added image


Step 4:
Once prompted to log in, leave the Password field blank and click the Submit button.

 

User-added image


Step 5:
Under Utilities, click Save/Backup Settings.

 

User-added image


Step 6:
In the Save/Backup current settings window, click Save.

 

User-added image


Step 7:
A window will appear, asking you to save the configuration file.  Click Save once prompted.

 

User-added image


QUICK TIP:  The configuration file uses a .cfg file extension name.

Step 8:
Select your desired location for the configuration file then click Save.  It is recommended to save your file on your computer's Desktop so it is easier to locate. 

 

You have now secured a copy of a backup file for your router's settings.  If you want to know how to restore the settings in your Belkin router using the backup file, click on the link below:
 

How to restore the Belkin router using a Backup file


Related Video:

Restoring the settings in your Belkin router (VIDEO)

Was this support article useful?

Additional Support Questions?
Search Again