Keep your Belkin Protect Series Case looking and performing its best with regular cleaning and proper care. This guide covers how to remove dirt and fingerprints, clean the soft-touch finish, and help prevent discoloration and wear.
Before You Begin
- Remove your iPhone from the case before cleaning.
- Disconnect any attached accessories such as chargers, wallets, or lanyards.
- Do not use harsh chemicals, bleach, acetone, paint thinners, or abrasive cleaning products.
Removing Dirt and Fingerprints
Dust, fingerprints, and everyday grime can build up on your case over time.
What You'll Need
- Soft microfiber cloth
- Clean water
- Mild hand soap (if needed)
1
Remove the case from your phone.
2
Wipe the entire case with a dry microfiber cloth to remove loose dust and debris.
3
If fingerprints or dirt remain, slightly dampen the cloth with water.
4
Gently wipe all surfaces of the case using circular motions.
5
For stubborn dirt, add a small amount of mild hand soap to the damp cloth and clean the affected area.
6
Wipe away any soap residue with a clean damp cloth.
7
Allow the case to air dry completely before reinstalling it on your phone.
Helpful Tip
Regular cleaning helps prevent oils and dirt from building up on the case surface.
Cleaning the Soft-Touch Finish
The Protect Series features a premium soft-touch exterior that provides a comfortable grip.
Best Cleaning Method
- Use a soft microfiber cloth dampened with water.
- Gently wipe the soft-touch surface to remove fingerprints, skin oils, and dust.
- Dry the case immediately with a clean microfiber cloth.
Avoid These Cleaning Products
Do not use:
- Alcohol-based cleaners
- Bleach
- Acetone or nail polish remover
- Abrasive cleaners
- Rough scrubbing pads
These products may damage the soft-touch coating and affect the appearance of the case.
Preventing Discoloration and Wear
While the case is designed with UV-resistant materials to help reduce discoloration, proper care can help keep it looking newer for longer.
Best Practices
- Clean the case regularly to remove dirt, oils, and residue.
- Remove lotions, sunscreen, makeup, or other cosmetic products from the case as soon as possible.
- Avoid prolonged contact with dyes from denim, handbags, or other colored materials.
- Store the phone in a clean, dry environment when not in use.
- Avoid exposing the case to excessive heat for extended periods.
If the Case Gets Wet
- Remove the case from the phone.
- Wipe it dry with a soft cloth.
- Allow it to air dry completely before reinstalling.
Frequently Asked Questions
| Question | Answer |
| Can I wash the case under running water? | Yes. You can rinse the case with clean water, but make sure it is completely dry before placing it back on your phone. |
| Can I use disinfecting wipes on the case? | It is best to use a soft cloth with water or mild soap. Harsh cleaning chemicals may affect the finish over time. |
| Why does my case look shiny in some areas? | Natural oils from your hands can temporarily create a shiny appearance. Cleaning the case with a microfiber cloth usually restores its original look. |
| How often should I clean my case? | For best results, clean the case whenever you notice visible dirt, fingerprints, or buildup from daily use. |
| Will cleaning remove the soft-touch coating? | No. Using a soft cloth and mild cleaning methods will not damage the coating. Avoid harsh chemicals and abrasive materials. |