Connect Rugged USB‑C iPad Keyboard w/ Stand (TBA010/TBA011) FAQs 

PRODUCT INFORMATION
What are the Belkin TBA010 and TBA011 keyboard?   The TBA010 and TBA011 are wired USB-C keyboards designed for USB-C iPads. They provide a full-size typing experience and connect directly to the iPad without wireless setup. 
What is the difference between TBA010 and TBA011? TBA010 – Keyboard with a built-in stand 

TBA011 – Keyboard without a stand (compact version) 

Do I need to charge the keyboard?  No. The keyboard is powered directly by the iPad through the USB-C connection.  
Does the keyboard use Bluetooth? 

No. The keyboard uses a wired USB-C connection and does not require Bluetooth.  

How do I register this device?You can register your device at Belkin.com where you must enter details about your product.
HARDWARE INFORMATION
What type of connection does the keyboard use? 

The keyboard uses a USB-C wired connection that plugs directly into the iPad. 

Is the keyboard durable for daily use?  

Yes. The keyboard is designed with: 

  • Pry-resistant keys 

  • Durable build for repeated use 

  • Drop-tested design (function remains after drops) 

Is the keyboard water-resistant?  
Yes. The keyboard has an IP51 rating and can handle minor spills and be wiped clean. 
What are the physical differences between TBA010 and TBA011? 

  • TBA010 is larger and includes a stand 

  • TBA011 is thinner, lighter, and more compact 

What are the dimensions and weight of the keyboards? 

  • TBA010: Larger form factor, heavier (approx. 532 g) 

  • TBA011: Slimmer design, lighter (approx. 416 g) 

COMPATIBILITY

What compatible devices will work with TBA010 and TBA011? 

The TBA010 and TBA011 are designed for USB‑C enabled iPads and are tested with the following models:  

  • iPad 11th Generation (A16)   

  • iPad 10th Generation   

  • iPad Pro 11‑inch (M5)   

  • iPad Pro 11‑inch (M4)   

  • iPad Air 11‑inch (M3)   

  • iPad mini (A17 Pro)  

FUNCTIONALITY
How do I set up the keyboard?  Follow these steps: 

  1. Plug the USB-C connector into your iPad. 

  1. Wait for the keyboard to be recognized automatically. 

  1. Start typing. 

(No setup or pairing is required.) 

How do the shortcut (hot) keys work?   The keyboard includes iPadOS shortcut keys for: 

  • Volume 

  • Brightness 

  • Media controls 

These keys allow quick access to common iPad functions. 

Can I disable the shortcut keys?  Yes. The shortcut (hot) keys can be turned off to reduce distractions, especially in classroom or testing environments.  
How do I disable or enable the hot (shortcut) keys on the keyboard?

You can turn the shortcut (hot) keys ON or OFF using key combinations.

To disable the hot keys:

  1. Press and hold the N + H keys at the same time.
  2. Hold for 5 seconds, then release.

To enable the hot keys again:

  1. Press and hold the Y + H keys at the same time.
  2. Hold for 5 seconds, then release.
Can I use the keyboard for school or testing environments?  
Yes. The keyboard is designed to support standardized testing requirements such as PARCC and SBAC. (* PARCC and SBAC are U.S. organizations that create and administer standardized academic assessments for K–12 students.) 
Will the keyboard work immediately after plugging it in?  
Yes. The keyboard is plug-and-play and works instantly once connected to a compatible iPad. 
What should I do if the keyboard is not working?  
Follow these steps: 

  1. Check that the USB-C connector is securely plugged into the iPad. 

  1. Make sure your iPad is powered on and unlocked. 

  1. Disconnect and reconnect the keyboard. 

  1. Try using the keyboard with another compatible iPad (if available). 

 
Additional Support Questions?
Search Again