The Easy Align Tray comes with two (2) stickers numbered 1 (black) and 2 (white). These are labeled as such to guide you during the application process.
The steps below will guide you on how to apply the Belkin ScreenForce InvisiGlass® Advanced Screen Protection:
Step 1:
Remove the Apple Watch’s bands.
Remove the Apple Watch’s bands.
Step 2:
Wipe the screen with the microfiber cleaning cloth.
Wipe the screen with the microfiber cleaning cloth.
Step 3:
Remove any remaining dust by using the dust removal sticker. Align it to the top left of the watch screen to cover from edge to edge.
Remove any remaining dust by using the dust removal sticker. Align it to the top left of the watch screen to cover from edge to edge.
Step 4:
Lift the screen protector using sticker 1 then insert the watch into the tray.
Lift the screen protector using sticker 1 then insert the watch into the tray.
Step 5:
Slowly remove the dust removal sticker.
Step 6:
Gently press sticker 2 while slowly peeling off sticker 1.
Gently press sticker 2 while slowly peeling off sticker 1.
Step 7:
Slowly lower the film onto the screen from top to bottom.
Slowly lower the film onto the screen from top to bottom.
Step 8:
Push out any air bubbles by pressing the microfiber cleaning cloth on the screen.
Push out any air bubbles by pressing the microfiber cleaning cloth on the screen.
Step 9:
Remove the top lining by slowly peeling off sticker 2. Be careful not to remove the screen protector when taking off the top lining.
Remove the top lining by slowly peeling off sticker 2. Be careful not to remove the screen protector when taking off the top lining.
Related Article:
Getting to know the Belkin ScreenForce InvisiGlass® Advanced Screen Protection