The Titan EcoGuard Privacy Screen Protector is designed to protect your screen while keeping your on‑screen information private from side views. Following these steps helps ensure proper alignment, strong adhesion, and a bubble‑free finish. Set aside a few minutes and apply the protector in a clean, well‑lit area for best results.
- Clean your screen thoroughly
Use the included cleaning wipe to remove fingerprints, oils, and smudges. Dry the screen completely with the microfiber cloth, then use the dust removal sticker to lift any remaining dust. - Prepare the Easy Align Tray
Place your phone into the Easy Align Tray, ensuring it sits flat and fully secured. The tray is designed to hold your phone in the correct position for accurate alignment. - Position the screen protector
With the liner still attached, place the screen protector into the tray according to the orientation guides. Make sure the privacy filter is facing the correct direction before proceeding. - Start the application
Pull the adhesive liner tab slowly and evenly. As the liner is removed, the screen protector will begin to adhere to the screen automatically. - Allow the adhesive to spread
Let the screen protector bond naturally to the screen. You’ll see the adhesive spread outward; this is normal and helps reduce bubbles. - Remove the tray
Once the screen protector is fully applied, gently lift your phone out of the Easy Align Tray. - Finish and check
If small bubbles remain, gently push them toward the edges using your fingertip or the microfiber cloth. The protector should sit flat with clean edges and no lifting.
Helpful Tips
- Apply in a dust‑free environment to prevent particles from getting trapped.
- Avoid lifting or repositioning the protector once the adhesive has started bonding.
- For best privacy performance, use the phone in portrait orientation, where the privacy filter is most effective.
Applying the Titan EcoGuard Privacy Screen Protector (OVB081, OVB082, OVB083) FAQs
Q1. Does the privacy feature work in both portrait and landscape mode?
The privacy filter is optimized for portrait orientation, where it limits side viewing while keeping the screen clear when viewed straight on.
Q2. Will this screen protector affect touch sensitivity or fingerprint unlock?
No. The Titan EcoGuard Privacy Screen Protector is designed to maintain smooth touch response and supports ultrasonic fingerprint sensors when properly applied.
Q3. What should I do if I see bubbles after installation?
Most small bubbles will disappear as the adhesive settles. If needed, gently press bubbles toward the edges using your fingertip or the microfiber cloth.