NOTE: The Parent and Baby units supplied are already paired but you can add or replace Baby units purchased separately to your baby monitor system. You can pair a maximum of four (4) Baby units to your Parent unit. Each new Baby unit must be paired to the Parent unit before use.
IMPORTANT: Before proceeding, make sure the Baby and Parent units are turned ON. For instructions on how to turn your units ON, click here.
Step 1:
Press
on the Parent unit.
Step 2:
Press
or 
to highlight PAIR/UNPAIR CAM, then press 
or 
.
Step 3:
Press
or 
again to select Pair new CAM.
Step 4:
Press
or 
to choose a Baby unit slot, then press 
.
NOTE: If pairing fails, the screen will display Pairing failed. Try the pairing procedure again. If you pair a new Baby unit to an already occupied Baby unit slot, it will unpair the current Baby unit. Only one (1) Baby unit can be paired at a time.
Step 5:
When the display shows Please press both
and 
keys on CAM unit until POWER indicator flashes Red and Green light, press and hold the 
and 
buttons for 5 seconds on the new Baby unit. The light on the Power 
button of the new Baby unit will flash red and green alternately.
QUICK TIP: You have 60 seconds to complete the pairing process once the Parent unit display shows Please press both and keys on CAM unit until POWER indicator flashes Red and Green light.
Press
on the Parent unit.Step 2:
Press
or to highlight PAIR/UNPAIR CAM, then press or .Step 3:
Press
or again to select Pair new CAM.Step 4:
Press
or to choose a Baby unit slot, then press .NOTE: If pairing fails, the screen will display Pairing failed. Try the pairing procedure again. If you pair a new Baby unit to an already occupied Baby unit slot, it will unpair the current Baby unit. Only one (1) Baby unit can be paired at a time.
Step 5:
When the display shows Please press both
and keys on CAM unit until POWER indicator flashes Red and Green light, press and hold the and buttons for 5 seconds on the new Baby unit. The light on the Power button of the new Baby unit will flash red and green alternately.QUICK TIP: You have 60 seconds to complete the pairing process once the Parent unit display shows Please press both and keys on CAM unit until POWER indicator flashes Red and Green light.
When pairing has been successful, the screen will display the image from the newly paired Baby unit. The light on the Power
button of the new Baby unit will turn red when it is powered by AA batteries or green when powered by the power adaptor.Unpairing the units
Step 1:
Press
on the Parent unit.
Step 2:
Press
or 
to highlight PAIR/UNPAIR CAM, then press 
or 
.
Step 3:
Press
or 
to select Unpair CAM, then press 
.
Step 4:
Press
or 
to select the Baby unit you want to unpair, then press 
.
Step 5:
When the display shows, To unpair CAM # from the system, press the
button.
Step 6:
When the display shows, Press
key to confirm.
Press
on the Parent unit.Step 2:
Press
or to highlight PAIR/UNPAIR CAM, then press or .Step 3:
Press
or to select Unpair CAM, then press .Step 4:
Press
or to select the Baby unit you want to unpair, then press .Step 5:
When the display shows, To unpair CAM # from the system, press the
button.Step 6:
When the display shows, Press
key to confirm. When unpairing has been successful, the screen will display the image from the next paired Baby unit. If pairing was unsuccessful, the screen will display NO CAM paired.
