Resetting the OSRAM LIGHTIFY™ Gardenspot Mini RGB

If the OSRAM LIGHTIFY™ Gardenspot Mini RGB was previously connected to a Wi-Fi or paired to the Wemo® Link and you need to reconfigure, you will need to reset these Gardenspot lights so they can get detected again during the setup process.

There are two ways to reset your Gardenspot lights:

Manual Reset
Reset via the Wemo App

Manual Reset

Step 1: Start with the Gardenspot lights powered ON.

Step 2: Unplug the power supply for 1 second.

Step 3: Plug in the power supply for 1 second.

Step 4: Unplug the power supply for 1 second.

Step 5: Plug in the power supply for 1 second.

Step 6: Unplug the power supply for 1 second.

Step 7: Plug in the power supply for 1 second.

Step 8: Unplug the power supply for 1 second.

Step 9: Plug in the power supply for 1 second.

Step 10: Unplug the power supply for 1 second.

Step 11: Plug in the power supply and leave it ON. After about 3 seconds, the Gardenspot lights will flash rapidly three times to show a successful reset and ready for pairing.

Reset via the Wemo App

Step 1: Launch the User-added image

App.

Step 2: Tap the icon to edit.

Step 3: Tap Osram Lightify Garden RGB 19.

Step 4: Tap Reset Options.

Step 5: Then, select either:

Clear Product Info – This will ONLY reset the personalized device Name, Icon and Rules of your Gardenspot lights. This does NOT erase the connection to the Wemo Link.
Erase All Content and Settings – This will reset the Gardenspot lights back to its factory default settings. All saved data will be lost and cannot be retrieved.

Step 6: Once you are asked to confirm the reset, tap Yes. After about 3 seconds, the Gardenspot lights will flash rapidly three times to show a successful reset and ready for pairing.