The Belkin Fiber Extender (F1DN001X, F1DN002X and F1DN003X) is an accessory to the KVM secure switches product line. The Belkin Fiber Extender is designed to send data securely over fiber to the workstation. Since fiber cables do not radiate signals, it is extremely difficult to tap. It is also immune to lightning strikes, power surges and EMI/RFI. This makes the Belkin Fiber Extender perfect for industrial and electrical settings.
2. What are the features of the Belkin Fiber Extender?
The Belkin Fiber Extender boasts of the following features:
- Easy integration and operation
- Plug and Play – Simply connect both ends and start the display
- Easy connectivity with standard DVI-D and HDMI connectors and power over USB on TX side
- Clear LED visual indicators
- High quality video
- No compression – No loss of video quality from compression and decompression
- No latency – Less than 1 frame latency, ideal for defense and financial market applications
- No dropped frames – All frames in video stream reach the display
- No color or motion distortion – Video maintains its rich color and full motion
- HD Quality (1920x1200x60Hz) to a distance of up to 1K from the display.
- High quality audio
- HD audio in HDMI signal (F1DN002X only)
- Full EDID and HDCP support
- Compatible with all EDID and HDCP displays and devices
- 10/100 Base-T Ethernet
- Connecting guest laptops in conference rooms
- Connecting VoIP phones in call centers and trading rooms
- Connecting a network printer near the display
-
Small and efficient
- Green product – Lowest power requirement of all similar devices
- Smallest form factor of all similar devices
-
IR control
- Control matrix billboards, projectors and other difficult to reach displays
- Control conference room displays
The following is a list of the interfaces available on each of the Belkin Fiber Extender models:
- F1DN001X
- Video – 1 x DVI-D SL up to 1920 X 1200 (WUXGA), Plug-and-Play bidirectional EDID
- Audio – None
- Ethernet – 1 x 10/100Base-T
- Fiber-Optic Connector – SC connector
- IR – 3.5 mm port for IR pass-through from RX to TX, 6 ft (1.9 m) emitter and receiver cables included with a 36 kHz modulation frequency
- RS-232 – 9-pin D-Sub male full-duplex serial connector (RX only), up to 115 kbps USB to serial converter on TX USB
- F1DN002X
- Video – 1 x HDMI 1.3a standard 1080p full HD, Plug-and-Play bidirectional EDID
- Audio – None
- Ethernet – 1 x 10/100Base-T
- Fiber-Optic Connector – SC connector
- IR – 3.5 mm port for IR pass-through from RX to TX, 6 ft (1.9 m) emitter and receiver cables included with a 36 kHz modulation frequency
- RS-232 – 9-pin D-Sub male full-duplex serial connector (RX only), up to 115 kbps USB to serial converter on TX USB
- F1DN003X
- Video – 1 x DVI-D SL up to 1920 X 1200 (WUXGA), Plug-and-Play bidirectional EDID
- Audio – None
- Fiber-Optic Connector – SC connector
- USB – Full speed USB extension, USB type A male connector on TX side, 2 x USB type A female connectors on RX side
The Belkin Fiber Extender is backed by a 3-year limited warranty.
5. Where can I purchase the Belkin Fiber Extender?
The Belkin Fiber Extender can be purchased from the Belkin Store.
