Figure C
- Connect your ScreenCast AV receiver to your HDTV via an HDMI cable.
- Connect your ScreenCast AV receiver to the included power supply and plug the power supply into an available power outlet. Press the power button to turn it on.
Figure D (Optional Wall-Mount)
- The receiver can be wall-mounted with the included hardware and placement guide. If you are wall-mounting, make sure that the IR lens on the receiver can be seen by your remotes.
- Tip: To test this, mount the ScreenCast receiver, and take any remote control to where you'll be watching the HDTV. The ScreenCast receiver is in a good position if you see a blue flash on the receiver’s top LED when you press a key on the remote control.