With the Easy Align technology, putting your Belkin SCREENFORCE™ TemperedGlass Screen Protector on your iPad® becomes effortless and easy to master. Follow the instructions below to learn how.
NOTE: Actual device images may vary depending on the device you are using.
Step 1:
Remove and discard the inner lining of the tray to make room for your iPad.
Remove and discard the inner lining of the tray to make room for your iPad.
Step 2:
Insert your iPad into the tray.
Step 3:
Wipe your iPad's screen with the microfiber cloth.
Step 4:
Remove any remaining dust using the dust removal sticker.
Step 5:
While holding the number 2 tab, remove the bottom lining with the number 1 tab.
Step 6:
Slowly lower the protector on to the screen from top to bottom while ensuring proper alignment.
Step 7:
Carefully slide a finger through the center in the direction indicated on the image below.
Step 8:
Remove the top lining by slowly peeling off the number 2 tab. Be careful not to remove the screen protector when taking off the top lining.
Step 9:
Remove the iPad from the tray.
Step 10:
Push out any air bubbles by pressing the microfiber cleaning cloth on the screen.
