Belkin Audio, Video, HDMI and Power Cables Frequently Asked Questions

TABLE OF CONTENTS
 
            AUDIO/VIDEO
     

 
AUDIO/VIDEO
   
The ECCN and HTS for the RFQ23020B is ECN: EAR99 and HTS: 8544.42.2000.
   
Yes, the F3H981's are shielded.
   
The F2N209b15-T is a straight-through cable.
   
Most VGA cables are called 15-pin HDDB15 however, the majority of VGA cables only have 14-pins; pin 9 is missing.  Pin 9 is responsible for supplying 5V DDC (Display Data Channel) power back to the connected graphics card with information about the available resolution of the monitor.  In almost all LCD and Plasma TV’s Pin 9 is required however, on other devices like projectors, etc., this pin is not required.  A 15-pin cable will work in a device only requiring 14-pins, as the female connector will still be keyed to accept 15-pins.
   
No, they would need an active video splitter, for example WV-VGA124-SPL.
 
A Mini-DisplayPort device can be plugged into a Thunderbolt port while a Thunderbolt device cannot be plugged into a Mini-DisplayPort port.
   
Yes, the F2E7171 has dual ferrite cores as well as shielding to reduce Electromagnetic interference.
   
The cable length of the AM22302 is 12ft.  The connector from end to end is 52.10mm which is about 2.05 inches.
   
Yes, the F3X1982: VGA/UXGA MONITOR CABLE W/AUDIO will support 1440x900Ultra Extended Graphics Array UXGA is the highest resolution VGA cable we have.  If they want anything higher than it’ll need to be HDMI.  UXGA will support display resolution of (1600×1200).
   
The gauge of the F2CD002b/F2CD002b10-E is 28AWG.
   
Yes, all of our DP cables supports DP 1.2.
   
Chokes is referring to the ferrite beads that help reduce Electromagnetic Interference (EMI).  The VGA cable that meets this requirement is F3H982.
 
HDMI
   
Yes, the F2CD021 is Active.
   
The length of the F2CD026 is 1.25 inches.
   
The gauge of the F8V3311 is 28AWG.
   
The data capacity of the F8V3311 is 10.2 Gbps and it supports 3D.
 
POWER
   
Yes, the F3A104 is RoHS compliant.
   
The rating of the F3A102 is 250V/10A/18AWG.

Was this support article useful?

Additional Support Questions?
Search Again