Resolving audio issues on the Belkin F4U093 when using MacBook

Some users may experience not being able to get sound from speakers, headphones and/or microphones connected to the Belkin USB-C™ Express Dock 3.1 HD (USB Type-C™), F4U093. The following troubleshooting tips have been found to resolve this issue.

Tip 1: Confirm that the speakers / headphones are turned ON and working properly. For a microphone, make sure it is only connected to the front 3.5 mm port.

NOTE: The dock does not differentiate between the front and rear 3.5 mm ports so if speakers and headphones are connected to them and the dock is set up properly, it will output to both.


Tip 2: On your MacBook®, go to System Preferences and then click on Sound. Check if the USB Audio CODEC is selected for each tab (Sound Effects, Output, and Input) and adjust the volume of the Input and Output according to your preference.

NOTE: If Internal Speakers or Internal Microphone is selected, the output / input will come from the MacBook instead of the dock.


Tip 3: If the sound is set to USB Audio CODEC and you still are not getting any sound out of your connected audio devices, do the following:
Step 1:
Disconnect the dock from the MacBook.

Step 2:
Shut down the MacBook.

Step 3:
Disconnect the peripherals from the dock.

Step 4:
Disconnect the power supply from the dock.

Step 5:
Reconnect the power supply to the dock.

Step 6:
Reconnect the peripherals to the dock.

Step 7:
Reconnect the USB-C cable from the dock to the MacBook.

Step 8:
Turn the MacBook back on.

這篇支援文章有幫助嗎?

尚有其他支援問題?
重新搜尋