Switch2, PS/2 (F1DF102Puk) user guide download here.

Switch2, USB (F1DF102Uuk) user guide download here.

Switch2, PS/2 with Audio (F1DG102Puk) user guide download here.

Switch2, USB with Audio (F1DG102Uuk) user guide download here.

Switch2 Wireless for PC (F1DG102Wuk) user guide download here.

What operating systems does Switch2 support? What type of mice does Switch2 support? What is the maximum video resolution that Switch2 supports? Can I use my DVI monitor with Switch2? Do I have to install any software to use Switch2? Do I have to connect one notebook and one desktop computer to Switch2? Does Switch2 allow me to transfer files from one computer to another computer? Does Switch2 require an AC adapter? The USB cable is too short to connect the VGA and USB cable at the same time on my computer.

Q: What operating systems does Switch2 support? A: All Switch2 for PC models support Windows® 98SE, 2000, Me, XP, 2003; Mac and Linux®.

Q: What type of mice does Switch 2 support? A: Switch2 will support PS/2 and USB mice from many manufacturers including Belkin, Microsoft®, Logitech®, and Kensington®.

Q: What is the maximum video resolution that Switch2 supports? A: The advanced video circuit in Switch2 supports a maximum resolution of 2048x1536@65Hz.

Q: Can I use my DVI monitor with Switch2? A: Yes, you can use a DVI-I monitor with Switch2 by attaching a VGA adapter to the monitor's DVI connector.

Q: Do I have to install any software to use Switch2? A: No, Switch2 does not require any software to be installed in your computers.

Q: Do I have to connect one notebook and one desktop computer to Switch2? A: No, Switch2 can also be used for two notebook computers or two desktop computers. We recommend the F1DG102Uuk or F1DF102Uuk which uses USB.

Q: Does Switch2 allow me to transfer files from one computer to another computer? A: No, Switch2 allows you to share peripherals between computers (monitor, keyboard, mouse, and speakers). To share or transfer files between computers, you will need a networking switch.

Q: Does Switch2 require an AC adapter? A: No, no additional power supply is required for Switch2 to function properly.

Q: The USB cable is too short to connect the VGA and USB cable at the same time on my computer. A: Please contact Belkin Technical Support, you will receive a free USB extension cable.

Monitor Support Keyboard Support Mouse Support Speaker Support

Monitor Support

I am getting ghosting, shadowing, or fuzzy images on my monitor.

• Check that all video cables are inserted properly
• Check that the monitor you are using supports the resolution and refresh-rate setting on your computer
• Check that the graphics card you are using supports the resolution and refresh-rate setting on your computer
• Connect the monitor directly into the computer with which you are having trouble with to see if the problem still appears
• Try a lower screen resolution
• Try a different refresh rate
• Try a different monitor (preferably a CRT)

I am getting a black screen on my monitor.

• Check that all video cables are inserted properly.
• Connect your monitor directly to the computer to verify that your monitor is functioning properly.
• Take your computer off standby mode.

Keyboard Support

My computer does not detect my keyboard and I get a keyboard error reported at + boot up.

• Check that your keyboard cable is connected properly to Switch2. Tighten any loose connections.
• Make sure that the drivers for your keyboard are installed on your computers (Standard Windows Drivers Preferable)
• Connect the Switch2 USB cable directly to a USB port on your computer.
• Enable USB legacy support on your BIOS. (Only for PS/2 based PCs)
• Uninstall all other keyboard drivers from your computers. (Standard Windows Drivers Preferable)

Mouse Support

My mouse is lost when I switch to a different computer.

• Check that your mouse cable is connected properly to Switch2. Tighten any loose connections.
• Allow up to one minute after your computer wakes up from standby mode for mouse function to return.
• Deactivate power management schemes on the computer with which you are experiencing problems.
• Try swapping the mouse with a different one.
• If PC is connected via USB but is PS/2 based then try enabling USB legacy support

My computer boots up fine, but the mouse does not work.

• Make sure that the drivers for your mouse are installed on your computers. (Remove any 3rd party mouse drivers and use standard drivers)
• Make sure the mouse works when directly plugged into the computer. (Rebooting may be necessary when trying this.)
• Try a different mouse.

When I switch from one computer to another, mouse movement is completely erratic.

• Make sure you do not have more than one mouse driver installed. (Remove any 3rd party mouse drivers and use standard drivers)
• Avoid moving the mouse or pressing the mouse button when switching ports on your Switch2.
• You can reset the mouse and resume proper mouse movement simply by unplugging the mouse from your Switch2 and waiting 2-3 seconds before plugging it in again. (Remove any 3rd party mouse drivers and use standard drivers)

Speaker Support

The Switch2 audio cable is not long enough to connect to the audio-output jack on my laptop.

• The Belkin Mini-Stereo Extension Cable (part number F8V204-06) allows you to extend the Switch2 audio cable by six feet. This cable is available at www.belkin.com.
• Will not support 5.1 Surround Sound Systems

If you need additional support, please click here.