| ST |
SC |
LC |
MT-RJ |
 |
 |
 |
 |
The ST
connector uses a
push-and-turn-to-
lock system. |
Has a molded
plastic plug casing
and a push/pull
locking system. |
Small form
factor connector
that resembles a
mini SC connector. |
Small form factor
connector with a
square plastic
casing that contains
both fibre strands
in a single polymer
ferrule. |
Locate the part number you are looking for by matching length to required connector type configuration.
62.5/125 Multimode – Belkin’s 62.5/125 multimode fibre cables are perfect for network deployments.
| ST |
ST |
A2F20200-01M |
A2F20200-02M |
A2F20200-03M |
A2F20200-05M |
A2F20200-10M |
| ST |
SC |
A2F20207-01M |
A2F20207-02M |
A2F20207-03M |
A2F20207-05M |
A2F20207-10M |
| ST |
LC |
F2F202L0-01M |
F2F202L0-02M |
F2F202L0-03M |
F2F202L0-05M |
F2F202L0-10M |
| ST |
MTRJ |
F2F20290-01M |
F2F20290-02M |
F2F20290-03M |
F2F20290-05M |
F2F20290-10M |
| SC |
SC |
A2F20277-01M |
A2F20277-02M |
A2F20277-03M |
A2F20277-05M |
A2F20277-10M |
| SC |
LC |
F2F402L7-01M |
F2F402L7-02M |
F2F402L7-03M |
F2F402L7-05M |
F2F402L7-10M |
| SC |
MTRJ |
F2F20297-01M |
F2F20297-02M |
F2F20297-03M |
F2F20297-05M |
F2F20297-10M |
| LC |
LC |
F2F202LL-01M |
F2F202LL-02M |
F2F202LL-03M |
F2F202LL-05M |
F2F202LL-10M |
| LC |
MTRJ |
F2F202L9-01M |
F2F202L9-02M |
F2F202L9-03M |
F2F202L9-05M |
F2F202L9-10M |
| MTRJ |
MTRJ |
F2F20299-01M |
F2F20299-02M |
F2F20299-03M |
F2F20299-05M |
F2F20299-10M |
50/125 Multimode – These fibre cables work in the same types of network deployments as
62.5/125 cables, and are also well suited for horizontal and intra-building deployments.
| ST |
LC |
F2F402L0-01M |
F2F402L0-02M |
F2F402L0-03M |
F2F402L0-05M |
F2F402L0-10M |
| SC |
SC |
A2F40277-01M |
A2F40277-02M |
A2F40277-03M |
A2F40277-05M |
A2F40277-10M |
| SC |
LC |
F2F402L7-01M |
F2F402L7-02M |
F2F402L7-03M |
F2F402L7-05M |
F2F402L7-10M |
| LC |
LC |
F2F402LL-01M |
F2F402LL-02M |
F2F402LL-03M |
F2F402LL-05M |
F2F402LL-10M |
| ST |
ST |
F2F40200-01M |
F2F40200-02M |
F2F40200-03M |
F2F40200-05M |
F2F40200-10M |
| ST |
SC |
F2F40207-01M |
F2F40207-02M |
F2F40207-03M |
F2F40207-05M |
F2F40207-10M |
8.3/125 Singlemode – Singlemode fibre is most often used for long-haul runs, between buildings
or in a campus environment.
| ST |
ST |
F2F80200-01M |
F2F80200-02M |
F2F80200-03M |
F2F80200-05M |
F2F80200-10M |
| ST |
SC |
F2F80207-01M |
F2F80207-02M |
F2F80207-03M |
F2F80207-05M |
F2F80207-10M |
| ST |
LC |
F2F802L0-01M |
F2F802L0-02M |
F2F802L0-03M |
F2F802L0-05M |
F2F802L0-10M |
| SC |
SC |
F2F80277-01M |
F2F80277-02M |
F2F80277-03M |
F2F80277-05M |
F2F80277-10M |
| SC |
LC |
F2F802L7-01M |
F2F802L7-02M |
F2F802L70-3M |
F2F802L70-05M |
F2F802L7-10M |
| LC |
LC |
F2F802LL-01M |
F2F802LL-02M |
F2F802LL-03M |
F2F802LL-05M |
F2F802LL-10M |
The Construction of a Fibre-Optic Cable:
Cable Jacket - The outermost layer of the fibre cable.
Strengthening Fibres - The strengthening fibres that help protect the core against damage during
installation or from being crushed.
Coating - This layer of thicker plastic surrounds the cladding and helps protect the fibre core.
Cladding - The layer that protects the core and causes the neccessary reflection to allow light to travel through the Fibre-core segment.
Core - The physical component that transports the optical data signal, made up of a continuous strand of glass. The core's diameter is measured in microns.
| Core |
Cladding |
Mode |
| 62.5 |
125 |
Multimode |
This number means that the core
diameter of this cable is
62.5 microns. |
This number means that the
cladding of this cable is
125 microns. |
This refers to the mode of
the cable.
|
Belkin uses a very flexible jacket for our Fibre patch cable(RoHS-compliant).
- All ferrules are ceramic for optimal data transmission
- Top-Quality Coming glass cores
- PC polish to ensire optimal performance
Belkin Fibre-Cable Statistics
Insertion loss: <0.5 dB
Fibre extension: -0.05 µm < H +0.05 µm
Apex offset: < 50 µm
Increase in insertion loss after mating: 0.2 dB max.
Operation temperature: -20° to 70° C
Storage temperature: -40° to 80° C
|
