Lieu:

Routeur Sans Fil N1

Routeur Sans Fil N1

Part # F5D8231fr4

Restoring Factory Defaults

Question

How do I restore the factory defaults of my device?

Réponse

Restoring Factory Defaults

 

When you cannot access the system (you have forgotten the user name, IP address, or password), you can restore factory defaults from the IP Device.

 

To restore factory defaults: 

  1. Press and hold down the “Go-Local” button on the back of the IP Device for five seconds
    while powering up the IP Device. The IP Device will boot up
    in safe mode.
  2. Wait 30 seconds for the IP Device to reboot.
  3. Log in with the default IP address of the unit:http://192.168.2.155/config
    The blank login screen will appear (no background picture).
    Note: Do not start the IP address with https.
  4. Type in the following default user name and password (case-sensitive), and
    click “Login”. This user name and password only work immediately after the
    reset procedure described above.

    Safe-Mode User Name
    Safe-Mode Password
    admin
    SAFEmode

  5. From the menu, select “Restore Factory Settings”. A warning will appear
    advising you that all device data will be erased.
  6. Click “Restore”. The factory defaults will be restored. When the process
    finishes, you will be prompted to reboot.
  7. Click “Reboot” to restart the IP Device.

Résumé

When you cannot access the system (you have forgotten the user name, IP address, or password), you can restore factory defaults from the IP Device.